Quoting Peter Ujfalusi (2014-06-29 22:56:55)
> Hi Javier,
>
> On 06/27/2014 09:23 PM, Javier Martinez Canillas wrote:
> > Hello Peter,
> >
> > On Fri, Jun 27, 2014 at 8:01 AM, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
> >> Palmas class of devices can provide 32K clock(s) to be used by other devices
> >> on the board. Depending on the actual device the provided clocks can be:
> >> CLK32K_KG and CLK32K_KGAUDIO
> >> or only one:
> >> CLK32K_KG (TPS659039 for example)
> >>
> >> Use separate compatible flags for the two 32K clock.
> >> A system which needs or have only one of the 32k clock from
> >> Palmas will need to add node(s) for each clock as separate section
> >> in the dts file.
> >> The two compatible property is:
> >> "ti,palmas-clk32kg" for clk32kg clock
> >> "ti,palmas-clk32kgaudio" for clk32kgaudio clock
> >>
> >> Apart from the register control of the clocks - which is done via
> >> the clock API there is a posibility to enable the external sleep
> >> control. In this way the clock can be enabled/disabled on demand by the
> >> user of the clock.
> >>
> >> See the documentation for more details.
> >>
> >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> >> Reviewed-by: Nishanth Menon <nm@xxxxxx>
>
> >> +static unsigned long palmas_clks_recalc_rate(struct clk_hw *hw,
> >> + unsigned long parent_rate)
> >> +{
> >> + return 32768;
> >> +}
> >
> > I see that other clock drivers using a constant rate return 0 if the
> > clock has not been enabled.
>
> and there are examples when similar fixed clock drivers returns only the clock
> value, like clk-max77686. I can not find clear guidelines neither in the
> documentation or around the header/c files for this.
> Mike, what is the appropriate way of handling the recalc_rate?
You are right that there are no guidelines stating, "don't do that", but
please, "don't do that" ;-)
clk_enable and clk_set_rate are entirely unrelated operations from the
perspective of the Linux clock framework, and mixing these two classes
of operations is a recipe for pain.
>
> > So maybe is more correct to have something
> > like the following?
> >
> > if (__clk_is_enabled(hw->clk))
> > return 32768;
> > else
> > return 0;
So what happens here if this is gateable clock and later on we call
clk_enable on it? The clocks rate will still be zero since
clk_enable/clk_disable do not touch the rate at all.
Regards,
Mike
> >
> > Best regards,
> > Javier
> >
>
>
> --
> Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
