We no longer need the horrible driver internal videmode tables, which
were used to decide if a given videomode is a HDMI or DVI mode. So
remove all related code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/fbdev/omap2/dss/hdmi.h | 11 -
drivers/video/fbdev/omap2/dss/hdmi_common.c | 316 ----------------------------
2 files changed, 327 deletions(-)
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e3956defc1c3..262771b9b76b 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -179,11 +179,6 @@ enum hdmi_audio_mclk_mode {
HDMI_AUDIO_MCLK_192FS = 7
};
-struct hdmi_cm {
- int code;
- int mode;
-};
-
struct hdmi_video_format {
enum hdmi_packing_mode packing_mode;
u32 y_res; /* Line per panel */
@@ -192,7 +187,6 @@ struct hdmi_video_format {
struct hdmi_config {
struct omap_video_timings timings;
- struct hdmi_cm cm;
struct hdmi_avi_infoframe infoframe;
enum hdmi_core_hdmi_dvi hdmi_dvi_mode;
};
@@ -272,8 +266,6 @@ struct hdmi_phy_data {
struct hdmi_core_data {
void __iomem *base;
-
- struct hdmi_avi_infoframe avi_infoframe;
};
static inline void hdmi_write_reg(void __iomem *base_addr, const u32 idx,
@@ -339,9 +331,6 @@ int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy);
int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes);
/* HDMI common funcs */
-const struct hdmi_config *hdmi_default_timing(void);
-const struct hdmi_config *hdmi_get_timings(int mode, int code);
-struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing);
int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
struct hdmi_phy_data *phy);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index 9a2c39cf297f..7d5f1039de9f 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -1,18 +1,4 @@
-/*
- * Logic for the below structure :
- * user enters the CEA or VESA timings by specifying the HDMI/DVI code.
- * There is a correspondence between CEA/VESA timing and code, please
- * refer to section 6.3 in HDMI 1.3 specification for timing code.
- *
- * In the below structure, cea_vesa_timings corresponds to all OMAP4
- * supported CEA and VESA timing values.code_cea corresponds to the CEA
- * code, It is used to get the timing from cea_vesa_timing array.Similarly
- * with code_vesa. Code_index is used for back mapping, that is once EDID
- * is read from the TV, EDID is parsed to find the timing values and then
- * map it to corresponding CEA or VESA index.
- */
-
#define DSS_SUBSYS_NAME "HDMI"
#include <linux/kernel.h>
@@ -22,308 +8,6 @@
#include "hdmi.h"
-static const struct hdmi_config cea_timings[] = {
- {
- { 640, 480, 25200000, 96, 16, 48, 2, 10, 33,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 1, HDMI_HDMI },
- },
- {
- { 720, 480, 27027000, 62, 16, 60, 6, 9, 30,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 2, HDMI_HDMI },
- },
- {
- { 1280, 720, 74250000, 40, 110, 220, 5, 5, 20,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 4, HDMI_HDMI },
- },
- {
- { 1920, 540, 74250000, 44, 88, 148, 5, 2, 15,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- true, },
- { 5, HDMI_HDMI },
- },
- {
- { 1440, 240, 27027000, 124, 38, 114, 3, 4, 15,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- true, },
- { 6, HDMI_HDMI },
- },
- {
- { 1920, 1080, 148500000, 44, 88, 148, 5, 4, 36,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 16, HDMI_HDMI },
- },
- {
- { 720, 576, 27000000, 64, 12, 68, 5, 5, 39,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 17, HDMI_HDMI },
- },
- {
- { 1280, 720, 74250000, 40, 440, 220, 5, 5, 20,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 19, HDMI_HDMI },
- },
- {
- { 1920, 540, 74250000, 44, 528, 148, 5, 2, 15,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- true, },
- { 20, HDMI_HDMI },
- },
- {
- { 1440, 288, 27000000, 126, 24, 138, 3, 2, 19,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- true, },
- { 21, HDMI_HDMI },
- },
- {
- { 1440, 576, 54000000, 128, 24, 136, 5, 5, 39,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 29, HDMI_HDMI },
- },
- {
- { 1920, 1080, 148500000, 44, 528, 148, 5, 4, 36,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 31, HDMI_HDMI },
- },
- {
- { 1920, 1080, 74250000, 44, 638, 148, 5, 4, 36,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 32, HDMI_HDMI },
- },
- {
- { 2880, 480, 108108000, 248, 64, 240, 6, 9, 30,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 35, HDMI_HDMI },
- },
- {
- { 2880, 576, 108000000, 256, 48, 272, 5, 5, 39,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 37, HDMI_HDMI },
- },
-};
-
-static const struct hdmi_config vesa_timings[] = {
-/* VESA From Here */
- {
- { 640, 480, 25175000, 96, 16, 48, 2, 11, 31,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 4, HDMI_DVI },
- },
- {
- { 800, 600, 40000000, 128, 40, 88, 4, 1, 23,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 9, HDMI_DVI },
- },
- {
- { 848, 480, 33750000, 112, 16, 112, 8, 6, 23,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0xE, HDMI_DVI },
- },
- {
- { 1280, 768, 79500000, 128, 64, 192, 7, 3, 20,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x17, HDMI_DVI },
- },
- {
- { 1280, 800, 83500000, 128, 72, 200, 6, 3, 22,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x1C, HDMI_DVI },
- },
- {
- { 1360, 768, 85500000, 112, 64, 256, 6, 3, 18,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x27, HDMI_DVI },
- },
- {
- { 1280, 960, 108000000, 112, 96, 312, 3, 1, 36,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x20, HDMI_DVI },
- },
- {
- { 1280, 1024, 108000000, 112, 48, 248, 3, 1, 38,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x23, HDMI_DVI },
- },
- {
- { 1024, 768, 65000000, 136, 24, 160, 6, 3, 29,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x10, HDMI_DVI },
- },
- {
- { 1400, 1050, 121750000, 144, 88, 232, 4, 3, 32,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x2A, HDMI_DVI },
- },
- {
- { 1440, 900, 106500000, 152, 80, 232, 6, 3, 25,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x2F, HDMI_DVI },
- },
- {
- { 1680, 1050, 146250000, 176 , 104, 280, 6, 3, 30,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_LOW,
- false, },
- { 0x3A, HDMI_DVI },
- },
- {
- { 1366, 768, 85500000, 143, 70, 213, 3, 3, 24,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x51, HDMI_DVI },
- },
- {
- { 1920, 1080, 148500000, 44, 148, 80, 5, 4, 36,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x52, HDMI_DVI },
- },
- {
- { 1280, 768, 68250000, 32, 48, 80, 7, 3, 12,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x16, HDMI_DVI },
- },
- {
- { 1400, 1050, 101000000, 32, 48, 80, 4, 3, 23,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x29, HDMI_DVI },
- },
- {
- { 1680, 1050, 119000000, 32, 48, 80, 6, 3, 21,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x39, HDMI_DVI },
- },
- {
- { 1280, 800, 79500000, 32, 48, 80, 6, 3, 14,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x1B, HDMI_DVI },
- },
- {
- { 1280, 720, 74250000, 40, 110, 220, 5, 5, 20,
- OMAPDSS_SIG_ACTIVE_HIGH, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x55, HDMI_DVI },
- },
- {
- { 1920, 1200, 154000000, 32, 48, 80, 6, 3, 26,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_HIGH,
- false, },
- { 0x44, HDMI_DVI },
- },
-};
-
-const struct hdmi_config *hdmi_default_timing(void)
-{
- return &vesa_timings[0];
-}
-
-static const struct hdmi_config *hdmi_find_timing(int code,
- const struct hdmi_config *timings_arr, int len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- if (timings_arr[i].cm.code == code)
- return &timings_arr[i];
- }
-
- return NULL;
-}
-
-const struct hdmi_config *hdmi_get_timings(int mode, int code)
-{
- const struct hdmi_config *arr;
- int len;
-
- if (mode == HDMI_DVI) {
- arr = vesa_timings;
- len = ARRAY_SIZE(vesa_timings);
- } else {
- arr = cea_timings;
- len = ARRAY_SIZE(cea_timings);
- }
-
- return hdmi_find_timing(code, arr, len);
-}
-
-static bool hdmi_timings_compare(struct omap_video_timings *timing1,
- const struct omap_video_timings *timing2)
-{
- int timing1_vsync, timing1_hsync, timing2_vsync, timing2_hsync;
-
- if ((DIV_ROUND_CLOSEST(timing2->pixelclock, 1000000) ==
- DIV_ROUND_CLOSEST(timing1->pixelclock, 1000000)) &&
- (timing2->x_res == timing1->x_res) &&
- (timing2->y_res == timing1->y_res)) {
-
- timing2_hsync = timing2->hfp + timing2->hsw + timing2->hbp;
- timing1_hsync = timing1->hfp + timing1->hsw + timing1->hbp;
- timing2_vsync = timing2->vfp + timing2->vsw + timing2->vbp;
- timing1_vsync = timing1->vfp + timing1->vsw + timing1->vbp;
-
- DSSDBG("timing1_hsync = %d timing1_vsync = %d"\
- "timing2_hsync = %d timing2_vsync = %d\n",
- timing1_hsync, timing1_vsync,
- timing2_hsync, timing2_vsync);
-
- if ((timing1_hsync == timing2_hsync) &&
- (timing1_vsync == timing2_vsync)) {
- return true;
- }
- }
- return false;
-}
-
-struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
-{
- int i;
- struct hdmi_cm cm = {-1};
- DSSDBG("hdmi_get_code\n");
-
- for (i = 0; i < ARRAY_SIZE(cea_timings); i++) {
- if (hdmi_timings_compare(timing, &cea_timings[i].timings)) {
- cm = cea_timings[i].cm;
- goto end;
- }
- }
- for (i = 0; i < ARRAY_SIZE(vesa_timings); i++) {
- if (hdmi_timings_compare(timing, &vesa_timings[i].timings)) {
- cm = vesa_timings[i].cm;
- goto end;
- }
- }
-
-end:
- return cm;
-}
-
int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
struct hdmi_phy_data *phy)
{
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
