Allow I2C_OMAP to be compiled as a module,
introduce selection of I2C_OMAP by TWL4030_CORE
and remove doubled 'obj-$(CONFIG_I2C_OMAP)' line from makefile.
Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@xxxxxxxxx>
---
arch/arm/plat-omap/Kconfig | 3 +++
arch/arm/plat-omap/Makefile | 2 +-
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/Makefile | 1 -
drivers/mfd/Kconfig | 1 +
5 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 5bc8e3b..4d19d6b 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -99,6 +99,9 @@ config OMAP_RESET_CLOCKS
probably do not want this option enabled until your
device drivers work properly.
+config I2C_OMAP_ENABLE
+ bool
+
config OMAP_BOOT_TAG
bool "OMAP bootloader information passing"
depends on ARCH_OMAP
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 175bfd6..e610bc9 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+obj-$(CONFIG_I2C_OMAP_ENABLE) += i2c.o
# OMAP MMU framework
obj-$(CONFIG_OMAP_MMU_FWK) += mmu.o
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index eb94378..176e053 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -400,6 +400,7 @@ config I2C_OCORES
config I2C_OMAP
tristate "OMAP I2C adapter"
depends on ARCH_OMAP
+ select I2C_OMAP_ENABLE
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index d4dc22d..97dbfa2 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 91c0417..1bc03bd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -53,6 +53,7 @@ config HTC_PASIC3
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+ select I2C_OMAP
help
Say yes here if you have TWL4030 family chip on your board.
This core driver provides register access and IRQ handling
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
