[PATCH v2 15/18] ARM: dts: dra7: Add dt data for PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added dt data for PCIe controller. This node contains dt data for
both the DRA7 part of designware controller and for the designware core.
The documention for this node can be found @ ../bindings/pci/ti-pci.txt.

Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Jingoo Han <jg1.han@xxxxxxxxxxx>
Cc: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
Cc: Marek Vasut <marex@xxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 arch/arm/boot/dts/dra7.dtsi |   69 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index eaeccaf..1239f0d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1036,6 +1036,75 @@
 			};
 		};
 
+		axi@0 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
+			pcie@51000000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 232 0x4>, <0 233 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+						<0 0 0 2 &pcie1_intc 2>,
+						<0 0 0 3 &pcie1_intc 3>,
+						<0 0 0 4 &pcie1_intc 4>;
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		axi@1 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
+			status = "disabled";
+			pcie@51000000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 355 0x4>, <0 356 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				ti,hwmods = "pcie2";
+				phys = <&pcie2_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+						<0 0 0 2 &pcie2_intc 2>,
+						<0 0 0 3 &pcie2_intc 3>,
+						<0 0 0 4 &pcie2_intc 4>;
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
 		sata: sata@4a141100 {
 			compatible = "snps,dwc-ahci";
 			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux