On 26/05/14 12:28, Archit Taneja wrote:
> The init/uninit port functions are used to set up the DPI and SDI outputs under
> the dss platform device. A 'reg' property is used to determine whether the node
> is DPI or SDI for OMAP34xx DSS revision. For other DSS revisions, only DPI
> output exists.
>
> For multiple DPI output instances(introduced in DRA7xx DSS), we would use the
> 'reg' property in dts to specify the DPI output instance.
>
> The current functions work fine if there is only one DPI output instance in
> DSS. For multiple DPI instances, it would get complicated to figure out whether
> 'reg' is used to specify whether the output is SDI, or another DPI instance.
>
> We create a list of port types supported for each DSS rev, with the index of the
> port in the list matching the reg id. This allows us to have a more generic way
> to init/uninit ports within DSS, and support multiple DPI ports.
>
> Also, make the uninit_port functions iterative since we will have multiple DPI
> ports to uninit in the future.
>
> Signed-off-by: Archit Taneja <archit@xxxxxx>
> ---
> drivers/video/fbdev/omap2/dss/dpi.c | 2 +-
> drivers/video/fbdev/omap2/dss/dss.c | 84 ++++++++++++++++++++++++++++++-------
> drivers/video/fbdev/omap2/dss/dss.h | 27 +++++++++++-
> drivers/video/fbdev/omap2/dss/sdi.c | 2 +-
> 4 files changed, 97 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
> index 9368972..8593567 100644
> --- a/drivers/video/fbdev/omap2/dss/dpi.c
> +++ b/drivers/video/fbdev/omap2/dss/dpi.c
> @@ -769,7 +769,7 @@ err_datalines:
> return r;
> }
>
> -void __exit dpi_uninit_port(void)
> +void __exit dpi_uninit_port(struct device_node *port)
> {
> if (!dpi.port_initialized)
> return;
> diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
> index 6daeb7e..54a84f4 100644
> --- a/drivers/video/fbdev/omap2/dss/dss.c
> +++ b/drivers/video/fbdev/omap2/dss/dss.c
> @@ -70,6 +70,8 @@ struct dss_features {
> u8 fck_div_max;
> u8 dss_fck_multiplier;
> const char *parent_clk_name;
> + enum omap_display_type *ports;
> + int num_ports;
> int (*dpi_select_source)(enum omap_channel channel);
> };
>
> @@ -689,6 +691,22 @@ void dss_debug_dump_clocks(struct seq_file *s)
> }
> #endif
>
> +
> +static enum omap_display_type omap2plus_ports[] = {
> +#ifdef CONFIG_OMAP2_DSS_DPI
> + OMAP_DISPLAY_TYPE_DPI,
> +#endif
> +};
> +
> +static enum omap_display_type omap34xx_ports[] = {
> +#ifdef CONFIG_OMAP2_DSS_DPI
> + OMAP_DISPLAY_TYPE_DPI,
> +#endif
> +#ifdef CONFIG_OMAP2_DSS_DSI
> + OMAP_DISPLAY_TYPE_SDI,
> +#endif
> +};
If you do this, then if you disable DPI from kernel config, the port
indexes change. The above should reflect the hardware, not which drivers
the user has enabled in the kernel.
Also, you used DSI above, not SDI.
> static const struct dss_features omap24xx_dss_feats __initconst = {
> /*
> * fck div max is really 16, but the divider range has gaps. The range
> @@ -698,6 +716,8 @@ static const struct dss_features omap24xx_dss_feats __initconst = {
> .dss_fck_multiplier = 2,
> .parent_clk_name = "core_ck",
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> + .ports = omap2plus_ports,
> + .num_ports = ARRAY_SIZE(omap2plus_ports),
> };
>
> static const struct dss_features omap34xx_dss_feats __initconst = {
> @@ -705,6 +725,8 @@ static const struct dss_features omap34xx_dss_feats __initconst = {
> .dss_fck_multiplier = 2,
> .parent_clk_name = "dpll4_ck",
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> + .ports = omap34xx_ports,
> + .num_ports = ARRAY_SIZE(omap34xx_ports),
> };
>
> static const struct dss_features omap3630_dss_feats __initconst = {
> @@ -712,6 +734,8 @@ static const struct dss_features omap3630_dss_feats __initconst = {
> .dss_fck_multiplier = 1,
> .parent_clk_name = "dpll4_ck",
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> + .ports = omap2plus_ports,
> + .num_ports = ARRAY_SIZE(omap2plus_ports),
> };
>
> static const struct dss_features omap44xx_dss_feats __initconst = {
> @@ -719,6 +743,8 @@ static const struct dss_features omap44xx_dss_feats __initconst = {
> .dss_fck_multiplier = 1,
> .parent_clk_name = "dpll_per_x2_ck",
> .dpi_select_source = &dss_dpi_select_source_omap4,
> + .ports = omap2plus_ports,
> + .num_ports = ARRAY_SIZE(omap2plus_ports),
> };
>
> static const struct dss_features omap54xx_dss_feats __initconst = {
> @@ -726,6 +752,8 @@ static const struct dss_features omap54xx_dss_feats __initconst = {
> .dss_fck_multiplier = 1,
> .parent_clk_name = "dpll_per_x2_ck",
> .dpi_select_source = &dss_dpi_select_source_omap5,
> + .ports = omap2plus_ports,
> + .num_ports = ARRAY_SIZE(omap2plus_ports),
> };
>
> static const struct dss_features am43xx_dss_feats __initconst = {
> @@ -733,6 +761,8 @@ static const struct dss_features am43xx_dss_feats __initconst = {
> .dss_fck_multiplier = 0,
> .parent_clk_name = NULL,
> .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
> + .ports = omap2plus_ports,
> + .num_ports = ARRAY_SIZE(omap2plus_ports),
> };
>
> static int __init dss_init_features(struct platform_device *pdev)
> @@ -798,6 +828,9 @@ static int __init dss_init_ports(struct platform_device *pdev)
> if (!port)
> return 0;
>
> + if (dss.feat->num_ports == 0)
> + return 0;
> +
> do {
> u32 reg;
>
> @@ -805,30 +838,53 @@ static int __init dss_init_ports(struct platform_device *pdev)
> if (r)
> reg = 0;
>
> -#ifdef CONFIG_OMAP2_DSS_DPI
> - if (reg == 0)
> + if (reg > dss.feat->num_ports - 1)
> + continue;
Maybe matter of taste, but I like (reg >= dss.feat_num_ports) more.
> +
> + if (dss.feat->ports[reg] == OMAP_DISPLAY_TYPE_DPI)
> dpi_init_port(pdev, port);
> -#endif
>
> -#ifdef CONFIG_OMAP2_DSS_SDI
> - if (reg == 1)
> + if (dss.feat->ports[reg] == OMAP_DISPLAY_TYPE_SDI)
> sdi_init_port(pdev, port);
> -#endif
Maybe the above could be something like this in pseudo code:
port_type = dss.feat->ports[reg];
switch (port_type) {
case OMAP_DISPLAY_TYPE_DPI:
dpi_init_port(pdev, port);
break;
...
}
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
