Op 11 feb 2009, om 13:25 heeft Gary Thomas het volgende geschreven:
Hiremath, Vaibhav wrote:Thanks, Vaibhav Hiremath-----Original Message----- From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- owner@xxxxxxxxxxxxxxx] On Behalf Of Gary Thomas Sent: Tuesday, February 10, 2009 9:35 PM To: Linux OMAP Subject: OMAP [TV] video I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping). Questions: * Are the settings in the kernel tree known to work [as is]? * Why the divergence from the recommended values? Any ideas or helpful pointers would be graciously accepted[Hiremath, Vaibhav] Can you provide some more details like, Which kernel version are you using?I started with the "official" OMAP tree (git://git.omapzoom.org/repo/ omapkernel.git)If there is a better starting point, I'd certainly like to know.
The right one is at http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=shortlog regards, Koen
Attachment:
PGP.sig
Description: Dit deel van het bericht is digitaal ondertekend
