Most dt omap3 boards configure nand-ecc-opt as bch8. Due to lack of hardware elm support, bch8 software implementation gets set. Since commit 0611c41934ab35ce84dea "ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes", nand support stops working. This patch allows ecc software fallback. --- arch/arm/mach-omap2/gpmc-nand.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4349e82..52c4834 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -43,13 +43,17 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +static bool gpmc_ecc_bch_capable(enum omap_ecc ecc_opt) { /* platforms which support all ECC schemes */ if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) return 1; + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) || + (ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW)) + return 1; + /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes * which require H/W based ECC error detection */ if ((cpu_is_omap34xx() || cpu_is_omap3630()) && @@ -57,14 +61,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) (ecc_opt == OMAP_ECC_BCH8_CODE_HW))) return 0; - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 - * and AM33xx derivates. Other chips may be added if confirmed to work. - */ - if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) - return 0; - /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) return 1; @@ -140,7 +136,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); - if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) { + if (!gpmc_ecc_bch_capable(gpmc_nand_data->ecc_opt)) { dev_err(dev, "Unsupported NAND ECC scheme selected\n"); return -EINVAL; } -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html