Re: [PATCH v7 3/4] ARM: dts: dra7: add support for parallel NAND flash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Pekon Gupta <pekon@xxxxxx> [140519 02:16]:
> From: Minal Shah <minalkshah@xxxxxxxxx>
> 
> DRA7xx platform has in-build GPMC and ELM h/w engines which can be used
> for accessing externel NAND flash device. This patch:
> - adds generic DT binding in dra7.dtsi for enabling GPMC and ELM h/w engines
> - adds DT binding for Micron NAND Flash (MT29F2G16AADWP) present on dra7-evm
> *Important*
> 	On DRA7 EVM, GPMC_WPN and NAND_BOOTn are controlled by DIP switch
> 	So following board settings are required for NAND device detection:
> 	SW5.9 (GPMC_WPN) = LOW
> 	SW5.1 (NAND_BOOTn) = HIGH
> 
> Signed-off-by: Minal Shah <minalkshah@xxxxxxxxx>
> Signed-off-by: Pekon Gupta <pekon@xxxxxx>
> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxx>

Thanks applying this into omap-for-v3.16/dt.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux