This driver should be sitting together with the other
led drivers.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/i2c/chips/Kconfig | 7 -------
drivers/i2c/chips/Makefile | 1 -
drivers/leds/Kconfig | 10 ++++++++++
drivers/leds/Makefile | 1 +
drivers/{i2c/chips/lp5521.c => leds/leds-lp5521.c} | 0
5 files changed, 11 insertions(+), 8 deletions(-)
rename drivers/{i2c/chips/lp5521.c => leds/leds-lp5521.c} (100%)
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index bb95b3e..e4831e1 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -141,13 +141,6 @@ config SENSORS_TSL2563
This driver can also be built as a module. If so, the module
will be called tsl2563.
-config LP5521
- tristate "LP5521 LED driver chip"
- depends on I2C
- help
- If you say yes here you get support for the National Semiconductor
- LP5521 LED driver.
-
config MENELAUS
bool "TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP24XX
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 32a395f..1c94712 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
obj-$(CONFIG_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
-obj-$(CONFIG_LP5521) += lp5521.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4d4ff64..8d0f37e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -134,6 +134,16 @@ config LEDS_GPIO
outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines.
+config LEDS_LP5521
+ tristate "LED Support for the LP5521 LEDs"
+ depends on LEDS_CLASS && I2C
+ help
+ If you say 'Y' here you get support for the National Semiconductor
+ LP5521 LED driver used in n8x0 boards.
+
+ This driver can be built as a module by choosing 'M'. The module
+ will be called leds-lp5521.
+
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7ac6ad3..4ab09e8 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
diff --git a/drivers/i2c/chips/lp5521.c b/drivers/leds/leds-lp5521.c
similarity index 100%
rename from drivers/i2c/chips/lp5521.c
rename to drivers/leds/leds-lp5521.c
--
1.6.1.265.g9a013
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
