If the GPIO for the backlight is on an I2C chip, we currently get nasty warnings like this during the boot: WARNING: CPU: 0 PID: 6 at drivers/gpio/gpiolib.c:2364 gpiod_set_raw_value+0x40/0x4c() Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 3.15.0-rc4-12393-gcde9f4e #400 Workqueue: deferwq deferred_probe_work_func [<c0014cbc>] (unwind_backtrace) from [<c001191c>] (show_stack+0x10/0x14) [<c001191c>] (show_stack) from [<c0566ae0>] (dump_stack+0x80/0x9c) [<c0566ae0>] (dump_stack) from [<c003f61c>] (warn_slowpath_common+0x68/0x8c) [<c003f61c>] (warn_slowpath_common) from [<c003f65c>] (warn_slowpath_null+0x1c/0x24) [<c003f65c>] (warn_slowpath_null) from [<c02f7e10>] (gpiod_set_raw_value+0x40/0x4c) [<c02f7e10>] (gpiod_set_raw_value) from [<c0308fbc>] (gpio_backlight_update_status+0x4c/0x74) [<c0308fbc>] (gpio_backlight_update_status) from [<c030914c>] (gpio_backlight_probe+0x168/0x254) [<c030914c>] (gpio_backlight_probe) from [<c0378fa8>] (platform_drv_probe+0x18/0x48) [<c0378fa8>] (platform_drv_probe) from [<c0377c40>] (driver_probe_device+0x10c/0x238) [<c0377c40>] (driver_probe_device) from [<c0376330>] (bus_for_each_drv+0x44/0x8c) [<c0376330>] (bus_for_each_drv) from [<c0377afc>] (device_attach+0x74/0x8c) [<c0377afc>] (device_attach) from [<c03771c4>] (bus_probe_device+0x88/0xb0) [<c03771c4>] (bus_probe_device) from [<c03775c8>] (deferred_probe_work_func+0x64/0x94) [<c03775c8>] (deferred_probe_work_func) from [<c00572e8>] (process_one_work+0x1b4/0x4bc) [<c00572e8>] (process_one_work) from [<c00579d0>] (worker_thread+0x11c/0x398) [<c00579d0>] (worker_thread) from [<c005dfd8>] (kthread+0xc8/0xe4) [<c005dfd8>] (kthread) from [<c000e768>] (ret_from_fork+0x14/0x2c) Fix this by using gpio_set_value_cansleep() as suggested in drivers/gpio/gpiolib.c:2364. This is what the other backlight drivers are also doing. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- a/drivers/video/backlight/gpio_backlight.c +++ b/drivers/video/backlight/gpio_backlight.c @@ -38,7 +38,8 @@ static int gpio_backlight_update_status(struct backlight_device *bl) bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) brightness = 0; - gpio_set_value(gbl->gpio, brightness ? gbl->active : !gbl->active); + gpio_set_value_cansleep(gbl->gpio, + brightness ? gbl->active : !gbl->active); return 0; } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html