Calculate the wrapper register offsets in a seperate function.
Improve code readability, decrease the dwc3_probe() size.
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
drivers/usb/dwc3/dwc3-omap.c | 80 ++++++++++++++++++++++++--------------------
1 file changed, 44 insertions(+), 36 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 1160ff4..872f065 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -383,6 +383,49 @@ static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
}
+static void dwc3_omap_map_offset(struct dwc3_omap *omap)
+{
+ u32 reg;
+ struct device_node *node = omap->dev->of_node;
+ int x_major;
+
+ reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
+ omap->revision = reg;
+ x_major = USBOTGSS_REVISION_XMAJOR(reg);
+
+ /* Differentiate between OMAP5 and AM437x */
+ switch (x_major) {
+ case USBOTGSS_REVISION_XMAJOR1:
+ case USBOTGSS_REVISION_XMAJOR2:
+ omap->irq_eoi_offset = 0;
+ omap->irq0_offset = 0;
+ omap->irqmisc_offset = 0;
+ omap->utmi_otg_offset = 0;
+ omap->debug_offset = 0;
+ break;
+ default:
+ /* Default to the latest revision */
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ break;
+ }
+
+ /* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
+ * changes in wrapper registers, Using dt compatible for aegis
+ */
+
+ if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ }
+}
+
static int dwc3_omap_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
@@ -397,7 +440,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
int irq;
int utmi_mode = 0;
- int x_major;
u32 reg;
@@ -448,41 +490,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err0;
}
- reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
- omap->revision = reg;
- x_major = USBOTGSS_REVISION_XMAJOR(reg);
-
- /* Differentiate between OMAP5 and AM437x */
- switch (x_major) {
- case USBOTGSS_REVISION_XMAJOR1:
- case USBOTGSS_REVISION_XMAJOR2:
- omap->irq_eoi_offset = 0;
- omap->irq0_offset = 0;
- omap->irqmisc_offset = 0;
- omap->utmi_otg_offset = 0;
- omap->debug_offset = 0;
- break;
- default:
- /* Default to the latest revision */
- omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
- omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
- omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
- omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
- omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
- break;
- }
-
- /* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
- * changes in wrapper registers, Using dt compatible for aegis
- */
-
- if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
- omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
- omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
- omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
- omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
- omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
- }
+ dwc3_omap_map_offset(omap);
reg = dwc3_omap_read_utmi_status(omap);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
