Re: [PATCH 3/4] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/04/14 02:52, Tony Lindgren wrote:
> We can pass the GPIO configuration for ls037v7dw01 in a standard
> gpios property.
> 
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>  .../bindings/panel/sharp,ls037v7dw01.txt           | 53 ++++++++++++++
>  .../omap2/displays-new/panel-sharp-ls037v7dw01.c   | 84 ++++++++++++++++++++--
>  2 files changed, 133 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/panel/sharp,ls037v7dw01.txt
> 
> diff --git a/Documentation/devicetree/bindings/panel/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/panel/sharp,ls037v7dw01.txt
> new file mode 100644
> index 0000000..7f6f5e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/sharp,ls037v7dw01.txt
> @@ -0,0 +1,53 @@
> +SHARP LS037V7DW01 TFT-LCD panel
> +
> +Required properties:
> +- compatible: should be "sharp,ls037v7dw01"
> +
> +Optional properties:
> +- reset-gpios: a GPIO spec for the optional reset pin
> +- enable-gpios: a GPIO array for the optional configuration GPIOs
> +  ordered MO, LR, UD, INI as specified in the LS037V7DW01.pdf file.
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> +
> +This panel can have zero to five GPIOs to configure
> +to change configuration between QVGA and VGA mode
> +and the scan direction. As these pins can be also
> +configured with external pulls, all the GPIOs are
> +considered optional with holes in the array.
> +
> +Example when connected to a omap2+ based device:
> +
> +	lcd0: display {
> +		compatible = "sharp,ls037v7dw01";
> +		power-supply = <&lcd_3v3>;
> +		reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
> +		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
> +				&gpio1 2 GPIO_ACTIVE_HIGH	/* gpio2, lcd LR */
> +				&gpio1 3 GPIO_ACTIVE_HIGH	/* gpio3, lcd UD */
> +				&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */

Why are most of the gpios in 'enable-gpios'? MO, LR and UD don't really
have anything to do with enabling the panel. Why not just have one
'gpios' array with all the gpios, as they are quite a mixed bunch?

 Tomi


Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux