On Tuesday, May 06, 2014 at 03:33:51 PM, Kishon Vijay Abraham I wrote:
> Added support for pcie controller in dra7xx. This driver re-uses
> the designware core code that is already present in kernel.
[...]
> +#define to_dra7xx_pcie(x) container_of((x), struct dra7xx_pcie, pp)
> +
> +static inline u32 dra7xx_pcie_readl(void __iomem *base, u32 offset)
Just pass struct dra7xx_pcie * instead of *base here , it will make the code
below shorter.
> +{
> + return readl(base + offset);
> +}
> +
> +static inline void dra7xx_pcie_writel(void __iomem *base, u32 offset, u32
> value) +{
DTTO.
> + writel(value, base + offset);
> +}
> +
> +static int dra7xx_pcie_link_up(struct pcie_port *pp)
> +{
> + struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
> + u32 reg = dra7xx_pcie_readl(dra7xx->base, PCIECTRL_DRA7XX_CONF_PHY_CS);
> +
> + if (reg & LINK_UP)
> + return true;
> + return false;
return reg & LINK_UP;
> +}
> +
> +static int dra7xx_pcie_establish_link(struct pcie_port *pp)
> +{
> + u32 reg;
> + int retries = 1000;
> + struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
> +
> + if (dw_pcie_link_up(pp)) {
> + dev_err(pp->dev, "link is already up\n");
This will spew, since the .link_up (and thus this function) can be called
repeatedly. The subsystem will query if the link is up via this function.
> + return 0;
> + }
> +
> + reg = dra7xx_pcie_readl(dra7xx->base, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
> + reg |= LTSSM_EN;
> + dra7xx_pcie_writel(dra7xx->base, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
> +
> + while (--retries) {
Use retries--
> + reg = dra7xx_pcie_readl(dra7xx->base,
> + PCIECTRL_DRA7XX_CONF_PHY_CS);
> + if (reg & LINK_UP)
> + break;
> + usleep_range(10, 20);
> + }
> +
> + if (retries <= 0) {
Then check if retries == 0 and retries can be unsigned int.
> + dev_err(pp->dev, "link is not up\n");
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
[...]
> +static int __init dra7xx_pcie_probe(struct platform_device *pdev)
> +{
> + u32 reg;
> + int ret;
> + int irq;
> + struct phy *phy;
> + void __iomem *base;
> + struct resource *res;
> + struct dra7xx_pcie *dra7xx;
> + struct device *dev = &pdev->dev;
> +
> + dra7xx = devm_kzalloc(&pdev->dev, sizeof(*dra7xx), GFP_KERNEL);
> + if (!dra7xx)
> + return -ENOMEM;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(dev, "missing IRQ resource\n");
> + return -EINVAL;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, irq, dra7xx_pcie_irq_handler,
> + IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request irq\n");
> + return ret;
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
> + base = devm_ioremap_nocache(dev, res->start, resource_size(res));
> + if (!base)
> + return -ENOMEM;
> +
> + phy = devm_phy_get(dev, "pcie-phy");
> + if (IS_ERR(phy))
> + return PTR_ERR(phy);
> +
> + ret = phy_init(phy);
> + if (ret < 0)
> + return ret;
> +
> + ret = phy_power_on(phy);
> + if (ret < 0)
> + goto err_power_on;
> +
> + dra7xx->base = base;
> + dra7xx->phy = phy;
> + dra7xx->dev = dev;
> +
> + pm_runtime_enable(&pdev->dev);
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(dev, "pm_runtime_get_sync failed\n");
> + goto err_runtime_get;
> + }
> +
> + reg = dra7xx_pcie_readl(dra7xx->base, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
> + reg &= ~LTSSM_EN;
> + dra7xx_pcie_writel(dra7xx->base, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
platform_set_drvdata() should be here, before you add the port.
> + ret = add_pcie_port(dra7xx, pdev);
> + if (ret < 0)
> + goto err_add_port;
> +
> + platform_set_drvdata(pdev, dra7xx);
> + return 0;
[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
