In DRA7, the cpu sees 32bit address, but the pcie controller can see only 28bit address. So whenever the cpu issues a read/write request, the 4 most significant bits are used by L3 to determine the target controller. For example, the cpu reserves 0x2000_0000 - 0x2FFF_FFFF for PCIe controller but the PCIe controller will see only (0x000_0000 - 0xFFF_FFF). So for programming the outbound translation window the *base* should be programmed as 0x000_0000. Whenever we try to write to say 0x2000_0000, it will be translated to whatever we have programmed in the translation window with base as 0x000_0000. Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Cc: Marek Vasut <marex@xxxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx> Acked-by: Mohit Kumar <mohit.kumar@xxxxxx> --- .../devicetree/bindings/pci/designware-pcie.txt | 1 + drivers/pci/host/pcie-designware.c | 39 ++++++++++++++------ drivers/pci/host/pcie-designware.h | 1 + 3 files changed, 29 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index d6fae13..c574dd3 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -27,6 +27,7 @@ Optional properties for fsl,imx6q-pcie - power-on-gpio: gpio pin number of power-enable signal - wake-up-gpio: gpio pin number of incoming wakeup signal - disable-gpio: gpio pin number of outgoing rfkill/endpoint disable signal +- base-mask: address mask for the PCIe controller target port Example: diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index c4e3732..243f148 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -463,6 +463,9 @@ int __init dw_pcie_host_init(struct pcie_port *pp) return -EINVAL; } + if (of_property_read_u64(np, "base-mask", &pp->base_mask)) + pp->base_mask = ~0x0ULL; + if (IS_ENABLED(CONFIG_PCI_MSI)) { pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, MAX_MSI_IRQS, &msi_domain_ops, @@ -502,12 +505,15 @@ int __init dw_pcie_host_init(struct pcie_port *pp) static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) { + u64 cfg0_base; + + cfg0_base = pp->cfg0_base & pp->base_mask; /* Program viewport 0 : OUTBOUND : CFG0 */ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, PCIE_ATU_VIEWPORT); - dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1, + dw_pcie_writel_rc(pp, cfg0_base, PCIE_ATU_LOWER_BASE); + dw_pcie_writel_rc(pp, (cfg0_base >> 32), PCIE_ATU_UPPER_BASE); + dw_pcie_writel_rc(pp, cfg0_base + pp->config.cfg0_size - 1, PCIE_ATU_LIMIT); dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); @@ -517,13 +523,16 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) { + u64 cfg1_base; + + cfg1_base = pp->cfg1_base & pp->base_mask; /* Program viewport 1 : OUTBOUND : CFG1 */ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1, + dw_pcie_writel_rc(pp, cfg1_base, PCIE_ATU_LOWER_BASE); + dw_pcie_writel_rc(pp, (cfg1_base >> 32), PCIE_ATU_UPPER_BASE); + dw_pcie_writel_rc(pp, cfg1_base + pp->config.cfg1_size - 1, PCIE_ATU_LIMIT); dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); @@ -532,13 +541,16 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) { + u64 mem_base; + + mem_base = pp->mem_base & pp->base_mask; /* Program viewport 0 : OUTBOUND : MEM */ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1, + dw_pcie_writel_rc(pp, mem_base, PCIE_ATU_LOWER_BASE); + dw_pcie_writel_rc(pp, (mem_base >> 32), PCIE_ATU_UPPER_BASE); + dw_pcie_writel_rc(pp, mem_base + pp->config.mem_size - 1, PCIE_ATU_LIMIT); dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr), @@ -548,13 +560,16 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) { + u64 io_base; + + io_base = pp->io_base & pp->base_mask; /* Program viewport 1 : OUTBOUND : IO */ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); - dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE); - dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE); - dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1, + dw_pcie_writel_rc(pp, io_base, PCIE_ATU_LOWER_BASE); + dw_pcie_writel_rc(pp, (io_base >> 32), PCIE_ATU_UPPER_BASE); + dw_pcie_writel_rc(pp, io_base + pp->config.io_size - 1, PCIE_ATU_LIMIT); dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET); dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr), diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index 3063b35..3fa12a6 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -35,6 +35,7 @@ struct pcie_port { struct device *dev; u8 root_bus_nr; void __iomem *dbi_base; + u64 base_mask; u64 cfg0_base; void __iomem *va_cfg0_base; u64 cfg1_base; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html