Hi,
On Monday 21 April 2014 08:40 PM, Tony Lindgren wrote:
* Archit Taneja <archit@xxxxxx> [140420 22:16]:
Hi,
On Friday 18 April 2014 10:48 PM, Tony Lindgren wrote:
* Archit Taneja <archit@xxxxxx> [140416 06:20]:
Add DT node for the ctrl-core sub module of the DRA7 control module. We map the
CTRL_MODULE_CORE address region up to 0x4a002d60, this region contains register
fields which configure clocks. The remainder of the registers are related to
pad configurations or cross-bar configurations, and therefore aren't mapped.
Can you please check if this can just use the existing
regmap syscon mapping:
syscon = <&dra7_ctrl_general>;
See how the drivers/regulator/pbias-regulator.c is using the
syscon to initialize a regulator and then omap_hsmmc.c just does
the standard regulator calls.
The thing is that this bit needs to be set before the the DSS hwmods are
reset, and that happens very early. If we don't do this, DSS won't reset
properly, and not get back to an idle state.
I am not sure where I can configure the syscon register early enough that it
happens before the hwmods are reset. With a syscon mapping, I guess we would
access the register when the DSS driver is probed. But that's too late for
us.
Ideally, it would be much better to have a syscon mapping. Do you have any
suggestions how this can be achieved very early in boot?
It's best to move the reset and initialization of DSS happen later. I believe
we already are resetting only some of the hwmods early on.
I looked at this in some more detail. With the current hwmod
flags(HWMOD_INIT_NO_RESET/NO_IDLE), we still try to enable the IP, it's
just the reset part(ocp reset/custom reset and sysc register) or the
disable part that is skipped. hwmod still tries to enable the IP.
This again results in the same issue.
One thing which wasn't clear was that why do we enable a hwmod in the
first place, if we know that we are going to skip reset?
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
