On 04/16/2014 11:35 AM, Tony Lindgren wrote: > * Felipe Balbi <balbi@xxxxxx> [140416 08:18]: >> TRM says we *must* write 1 to each bit we're handling >> in order to clear the IRQ status and bring IRQ line >> low. This patch implements that. >> >> Signed-off-by: Felipe Balbi <balbi@xxxxxx> >> --- >> >> Russell, I don't have HW to test, but this should >> solve the problem you saw when not using battery >> with Zoom board. Let me know if it doesn't. > > BTW, looks like we're enabling BCI automatically in twl4030.dtsi > while the legacy booting does not have TWL_COMMON_PDATA_BCI > enabled for LDP. Anyways, for LDP BCI should be enabled for > sure, that's the only way to power at least the earlier LDP > revisions. > I picked up https://patchwork.kernel.org/patch/4002371/ for testing. Unfortunately, it does not seem to work in my tests: ldp-board-no-battery uses upstream u-boot in a chainloaded configuration + does not have battery plugged in, instead, just J58 (charger) is connected - this is plugged on a remote farm setup for developers to work with. ldp-board-with-battery uses legacy bootloader with a battery simulator. omap2plus_defconfig + CONFIG_CHARGER_TWL4030 enabled. Result: v3-15-rc2-ldp-board-no-battery: Boot FAIL: http://slexy.org/raw/s20riTwu04 v3-15-rc2-ldp-board-with-battery: Boot PASS: http://slexy.org/raw/s2elKdJpI7 v3-15-rc2-with-felipe-fix-ldp-board-no-battery: Boot FAIL: http://slexy.org/raw/s20lKp2o0s This patch should probably also acknowledge that Russell reported this issue. -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
