Hi,
On Thursday 24 April 2014 03:46 PM, Tomi Valkeinen wrote:
Add support to configure the pins used for the HDMI lanes. The order and
polarity of the lanes can be defined in the DT data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
+static void hdmi_phy_configure_lanes(struct hdmi_phy_data *phy)
+{
+ static const u16 pad_cfg_list[] = {
+ 0x0123,
+ 0x0132,
+ 0x0312,
+ 0x0321,
+ 0x0231,
+ 0x0213,
+ 0x1023,
+ 0x1032,
+ 0x3012,
+ 0x3021,
+ 0x2031,
+ 0x2013,
+ 0x1203,
+ 0x1302,
+ 0x3102,
+ 0x3201,
+ 0x2301,
+ 0x2103,
+ 0x1230,
+ 0x1320,
+ 0x3120,
+ 0x3210,
+ 0x2310,
+ 0x2130,
+ };
+
+ u16 lane_cfg = 0;
+ int i;
+ unsigned lane_cfg_val;
+ u16 pol_val = 0;
+
+ for (i = 0; i < 4; ++i)
+ lane_cfg |= phy->lane_function[i] << ((3 - i) * 4);
+
+ pol_val |= phy->lane_polarity[0] << 0;
+ pol_val |= phy->lane_polarity[1] << 3;
+ pol_val |= phy->lane_polarity[2] << 2;
+ pol_val |= phy->lane_polarity[3] << 1;
+
+ for (i = 0; i < ARRAY_SIZE(pad_cfg_list); ++i)
+ if (pad_cfg_list[i] == lane_cfg)
+ break;
+
+ if (WARN_ON(i == ARRAY_SIZE(pad_cfg_list)))
+ i = 0;
+
+ lane_cfg_val = i;
I spent some time to see if we could get create lane_cfg_val without
having the table above, looks like there is no pattern at all in the
register field.
+
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, lane_cfg_val, 26, 22);
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, pol_val, 30, 27);
+}
+
int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
struct hdmi_config *cfg)
{
@@ -92,8 +183,7 @@ int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
/* Setup max LDO voltage */
REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
- /* Write to phy address 3 to change the polarity control */
- REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
wow, didn't realize it was hardcoded like this.
Reviewed-by: Archit Taneja <archit@xxxxxx?
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
