Re: OMAP3: Low DDR Memory bandwidth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 04 of February 2009 13:47:41 Ganeshan N wrote:
> Hi All,
> I am using OMAP3EVM and measuring DDR memory bandwidth. Used "lmbench" to
> measure the bandwidth.  I am getting low bandwidth around 460 MB/S in TI
> kernel 2.6.22 and getting bandwidth around 800 MB/S in git kernel
> 2.6.28-rc8.
>
> In kernel 2.6.22, there are two SDRC registers (SDRC_DLLA_CTRL and
> SDRC_POWER_REG), which are getting modified. I have updated code such that
> SDRC values for both the  the kernel 2.6.22 and 2.6.28 are same. After this
> updation there is no improvement in the bandwidth.  The SDRC is running at
> 166MHz.  I am using same x-loader and u-boot for both the kernel (2.6.22
> and 2.6.28).
>
> Can you please suggest some pointers/methods, to increase the DDR memroy
> bandwidth in 2.6.22 TI kernel.
>
> Thanks in advance.

why don't you use the .28 one then ? .22 is way too deprecated.
>
> With Regards
> Ganeshan
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux