On 04/22/2014 05:45 PM, Javier Martinez Canillas wrote: [...] >>> Time for me to verify every platform again. >> ok, boards updated with u-boot fixes etc.. >> >> next-20140422-omap2plus_defconfig >> 1: am335x-sk: Boot FAIL: http://slexy.org/raw/s2o4V7QFmX >> This one is in discussion in this thread. We just managed to get am335x-evm up and running as well. am335x-evm: Boot PASS: http://slexy.org/raw/s2WSAKSG2S I checked with DEBUG_LL a few mins back on AM335x-sk: http://slexy.org/raw/s2P8L4FGBY >> >> 2: am3517-evm: Boot PASS: http://slexy.org/raw/s21U08MZIu >> 3: am37x-evm: Boot PASS: http://slexy.org/raw/s2TYm46GgG >> 4: am43xx-epos: Boot PASS: http://slexy.org/raw/s21wjoqqjl >> 5: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s2X8Rh0sSw >> we know of this one. > > The fix for this is [PATCH] ARM: dts: am437x-gp-evm: Do not reset > gpio5 [0] right? Yep, This is a different issue compared to the AM335x-sk discussion. http://marc.info/?l=linux-omap&m=139819642824190&w=2 two patches for this one: https://patchwork.kernel.org/patch/3871201/ https://patchwork.kernel.org/patch/4034201/ we are still debating about how to go about it. > on AM335x-sk: > So this makes only am335x-sk to fail with the gpiolib irpchip > conversion as reported by Peter and you. > > Do you know what special use of GPIO have this board to behave > differently than the other boards? I've looked at the DTS but didn't > find anything evident. I could not find anything interesting yet. Peter did mention that reverting d04b76626e94 helped make the platform boot fine. I am trying to add a few prints and see which specific line does things go bad.. and if so why.. unfortunately, I am using the board remotely as well.. Will try to track this down in the next few hours and post back. > > [0]: http://www.spinics.net/lists/linux-omap/msg104702.html > -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
