We need to use set-rate-parent for dpll4_m5 clock path, so use the
ti,fixed-factor-clock version which supports set-rate-parent property.
The set-rate-parent flag itself is set in the following patch, this one
just changes the clock driver to ti,fixed-factor-clock without any other
changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap36xx-clocks.dtsi | 2 +-
arch/arm/boot/dts/omap3xxx-clocks.dtsi | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 6b5280d..200ae3a 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -83,7 +83,7 @@
};
&dpll4_m5x2_mul_ck {
- clock-mult = <1>;
+ ti,clock-mult = <1>;
};
&dpll4_m6x2_mul_ck {
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 12be2b3..351f58b 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -453,10 +453,10 @@
dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,fixed-factor-clock";
clocks = <&dpll4_m5_ck>;
- clock-mult = <2>;
- clock-div = <1>;
+ ti,clock-mult = <2>;
+ ti,clock-div = <1>;
};
dpll4_m5x2_ck: dpll4_m5x2_ck {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
