Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@xxxxxxxxxx> Cc: Nishanth Menon <nm@xxxxxx> Cc: Paul Walmsley <paul@xxxxxxxxx> Cc: Tero Kristo <t-kristo@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/configs/omap2plus_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3a0b53d..9da475a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y @@ -41,6 +43,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y CONFIG_NET=y @@ -158,11 +161,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y CONFIG_SENSORS_LM75=m CONFIG_THERMAL=y CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y @@ -175,6 +181,7 @@ CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
