Re: [PATCH] ARM: OMAP5: DSS hwmod data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomi,

Unfortunately, I have a lack of experience with DT DSS stuff.

How should I define the endpoints and the connector in my case?
Please, could you provide some reference.

Regarding omapfb, is it sufficient to turn it on in the Kernel config?

Thanks,

Dmitry

On 03/17/2014 03:28 PM, Tomi Valkeinen wrote:
On 17/03/14 15:22, Dmitry Lifshitz wrote:
Hi Tomi,

Thank you for the feedback.

We have OMAP5 based board with no ESD & Level Translator chip.
So, I made a quick hack in tpd12s015 driver to skip using un-relevant
GPIOs.
If you don't have tpd12s015 on your board, don't modify it. Remove it
from your board's dts file totally.

I've copied DSS DT structure from uEmv board *.dts.
However the HDMI output is not activate yet.

Here is some debug output:

root@cm-debian:~# dmesg | grep -i dss
[    0.040554] omap_hwmod: dss_dispc: cannot be enabled for reset (3)
[    0.043135] omap_hwmod: dss_dsi1: cannot be enabled for reset (3)
[    0.045725] omap_hwmod: dss_dsi2: cannot be enabled for reset (3)
[    0.048311] omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
[    0.050888] omap_hwmod: dss_rfbi: cannot be enabled for reset (3)
[    0.325392] DSS: set fck to 192000000
[    0.325400] DSS: dss_runtime_get
[    0.325427] DSS: dss_restore_context
[    0.325445] OMAP DSS rev 6.1
[    0.325450] DSS: dss_runtime_put
[    0.325456] DSS: dss_save_context
[    0.325461] DSS: context saved
[    0.325707] DSS: dss_restore_context
[    0.325711] DSS: context restored
[    0.325746] omapdss_dispc 58001000.dispc: OMAP DISPC rev 5.1
[    0.325838] DSS: dss_save_context
[    0.325843] DSS: context saved


I do not use uEvm BSP u-Boot. I'm forking from this source:
git://git.denx.de/u-boot-ti.git

Perhaps I'm missing some clocks initialization?
What are the correct bootargs for activating HDMI video output?
HDMI is the only output on the uevm, and if your board is similar, no
boot args are needed. But, of course, you need omapfb or omapdrm to
manage the display.

  Tomi



--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux