Re: [PATCH v1 1/3] ARM: dts: am335x-bone: add support for beaglebone NAND cape

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/12/2014 02:28 PM, Tony Lindgren wrote:
> * Robert Nelson <robertcnelson@xxxxxxxxx> [140312 12:11]:
>> On Wed, Mar 12, 2014 at 1:57 PM, Nishanth Menon <nm@xxxxxx> wrote:
>>> On Wed, Mar 12, 2014 at 1:26 PM, Gupta, Pekon <pekon@xxxxxx> wrote:
>>>> Hi,
>>>>
>>>>> From: Menon, Nishanth
>>>>>> On 03/12/2014 05:49 AM, Pekon Gupta wrote:
>>>>>> Beaglebone Board can be connected to expansion boards to add devices to them.
>>>>>> These expansion boards are called 'capes'. This patch adds support for
>>>>>> following versions of Beaglebone(AM335x) NAND capes
>>>>>> (a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
>>>>>> (b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
>>>>>> Further information and datasheets can be found at [1] and [2]
>>>> [...]
>>>>>> [1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
>>>>>> [2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
>>>>>>
>>>>>> Signed-off-by: Pekon Gupta <pekon@xxxxxx>
>>>>>> ---
>>>>>>  arch/arm/boot/dts/am335x-bone.dts | 123 ++++++++++++++++++++++++++++++++++++++
>>>>>>  1 file changed, 123 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
>>>>>> index 94ee427..be2c572 100644
>>>>>> --- a/arch/arm/boot/dts/am335x-bone.dts
>>>>>> +++ b/arch/arm/boot/dts/am335x-bone.dts
>>>>>
>>>>> better to make a nand_cape dts which includes the am335x-bone.dts?
>>>>>
>>>> Actually, I'm not in favor of having too many "xx_board_common.dts" files,
>>>> because it un-necessarily complexes things.
>>>>
>>>> We already have "arch/arm/boot/dts/am335x-bone-common.dtsi" which just saves
>>>> some lines common to DTS of both Beaglebone-LT(white) and Beaglebone-Black.
>>>> And, there is no guarantee that Beaglebone-LT(white) will remain compatible to
>>>> Beaglebone-black in future.
>>>> Example: some capes are not compatible to beaglebone-black [1], [2].
>>>>
>>>> So, I prefer to keep separate GPMC NAND nodes separately in both DTS,
>>>> unless there is a strong convincing reason otherwise.
>>>>
>>>>
>>>> [1] http://elinux.org/CircuitCo:BeagleBoardToys
>>>> [2] http://elinux.org/BeagleBone_Black_Capes
>>>
>>>
>>>
>>> Right, and adding NAND, GPMC nodes and asking folks to uncomment
>>> sections into a generic board file (which by default has none) makes
>>> more sense? I dont use NAND capes or might create my own cape. overo
>>> has the same challenges as bone family has.I dont see asking folks to
>>> uncomment entries to use the cape is a nicer alternative to having
>>> more dts entries.
>>
>> This is just going to get more messy with every cape addition. Should
>> we maybe just leave a basic BeagleBone & BeagleBone Black dts file in
>> mainline kernel.org.
>>
>> Then create a repo on github.com/beagleboard/ with every
>> <bone/black>-<first level cape>.dts option?
> 
> Or just include all devices on the most common capes but have their
> status as disabled by default.
> 
> For the pinctrl, we need to make sure the pins for a device are not
> muxed if it's set to disabled state.

You do have a bunch of "if you want nand, disable mmc2" configuration
in the usage of cape configurations such as this patch, or in the case
of [1] (audio cape), different regulator usage etc. Maintaining out of
tree cape dts might be an option, but that is prone to maintenance
burden as device tree conversion goes on (yeah, all the dt as ABI
stuff aside).

Keeping aside the subjective nature of what entitles a cape being a
"common cape",even introducing nodes that belong to three or four
different first level capes will definitely have it's own sets of
problems.

The ideal solution would be some folks pitching in on what Matt
pointed in [2] - basically "upstream a resource manager on
top of the basic overlay support that's in progress" and introduce
capes as part of that overlay support once it is upstream.

Failing which, keeping the base bone dts to basic stuff that bare
board supports and having per "first level cape" dts which includes
relevant dts sounds to me the only rationale and easily usable (as in:
without much device tree knowledge) - again, I admit "easily" is
subjective here.


[1] https://lkml.org/lkml/2014/2/5/183
[2] https://lkml.org/lkml/2014/2/5/247

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux