* Pekon Gupta <pekon@xxxxxx> [140205 05:31]:
> From: Minal Shah <minal.shah@xxxxxx>
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -93,6 +93,37 @@
> 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
> >;
> };
> +
> + nand_flash_x16: nand_flash_x16 {
> + /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
> + * So NAND flash requires following switch settings:
> + * SW5.9 (GPMC_WPN) = LOW
> + * SW5.1 (NAND_BOOTn) = HIGH */
> + pinctrl-single,pins = <
> + 0x0 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad0 */
> + 0x4 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad1 */
...
Can you guys please update this one to use the macros in
arch/arm/boot/dts/include/dt-bindings/pinctrl/omap.h?
Preferrably the new DRA7XX_CORE_IOPAD and friends macros.
I've picked up the other patches in this series already.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
