Hi Suman,
Thank you for the patch.
On Thursday 13 February 2014 12:15:34 Suman Anna wrote:
> From: Florian Vaussard <florian.vaussard@xxxxxxx>
>
> This patch adds the iommu bindings for all OMAP2+ SoCs. Apart from
> the standard bindings used by OMAP peripherals, this patch uses a
> 'dma-window' (already used by Tegra SMMU) and adds two OMAP custom
> bindings - 'ti,#tlb-entries' and 'ti,iommu-bus-err-back'.
>
> Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
> [s-anna@xxxxxx: split bindings document, add dra7 and bus error back]
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> ---
> .../devicetree/bindings/iommu/ti,omap-iommu.txt | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
>
> diff --git a/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
> b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt new file mode
> 100644
> index 0000000..116492d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
> @@ -0,0 +1,28 @@
> +OMAP2+ IOMMU
> +
> +Required properties:
> +- compatible : Should be one of,
> + "ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
> + "ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
> + "ti,dra7-iommu" for DRA7xx IOMMU instances
> +- ti,hwmods : Name of the hwmod associated with the IOMMU instance
> +- reg : Address space for the configuration registers
> +- interrupts : Interrupt specifier for the IOMMU instance
> +- dma-window : IOVA start address and length
Isn't the dma window more of a system configuration property than a hardware
property ? How do you expect it to be set ?
> +Optional properties:
> +- ti,#tlb-entries : Number of entries in the translation look-aside buffer.
> + Should be either 8 or 32 (default: 32)
> +- ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
> + back a bus error response on MMU faults.
Do these features vary per IOMMU instance or per IOMMU model ? In the latter
case they could be inferred from the compatible string by the driver without
requiring them to be explicit in DT (whether you want to do so is left to you
though).
> +Example:
> + /* OMAP3 ISP MMU */
> + mmu_isp: mmu@480bd400 {
> + compatible = "ti,omap2-iommu";
> + reg = <0x480bd400 0x80>;
> + interrupts = <24>;
> + ti,hwmods = "mmu_isp";
> + ti,#tlb-entries = <8>;
> + dma-window = <0 0xfffff000>;
> + };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
