On Wed, 22 Jan 2014 11:20:32 +0200 Jyri Sarha <jsarha@xxxxxx> wrote: > On 01/15/2014 05:51 PM, Jean-Francois Moine wrote: > > On Wed, 15 Jan 2014 13:27:21 +0200 > > Jyri Sarha <jsarha@xxxxxx> wrote: > > > >> From driver/gpu/drm/i2c/tda998x_drv.c. The driver configures CTS_N > >> register statically to a value that works only with 4 byte samples. > >> According to my tests it is possible to support 3 and 2 byte samples too > >> by changing the CTS_N register value, but I am not sure if the > >> configuration can be changed on the fly. My data sheet of the nxp chip > >> is very vague about the register definitions, but I suppose the register > >> configures some clock divider on the chip. HDMI supports only upto 24bit > >> audio and the data sheet states that any extraneous least significant > >> bits are ignored. > > > > In the tda998x driver, the CTS_N is automatic (AIP_CNTRL_0_ACR_MAN is > > not set). > > > > Then, in my Cubox (Marvell A510 + tda19988), the 16, 24 and 32 bits > > formats are working well with I2S input at any rate. > > > > Could you refer the kernel version (main line?) and the involved ASoC > drivers so could take I a look if there is something I could do differently? Both drivers are in the kernel main line. The ASoC is in sound/soc/kirkwood/. kirkwood-i2s.c defines the DAIs I2S and S/PDIF outputs. As both I2S and S/PDIF may be used for HDMI output in the Cubox, I wrote a tda998x CODEC which gets the audio ports from the DT and dynamically sets these ports and the audio type (i2s / spdif) on audio streaming start. I have not submitted yet this codec and the associated changes in tda998x, because I am waiting for a first patch series on the tda998x to be applied (http://lists.freedesktop.org/archives/dri-devel/2014-January/051552.html). -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
