On Mon, Jan 13, 2014 at 02:14:26PM -0800, Tony Lindgren wrote: > * Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> [140102 07:17]: > > Consolidate the setup of the channel control register. Prepare the > > basic value in the preparation of the DMA descriptor, and write it into > > the register upon descriptor execution. > > FYI, this patch seems to be the one that causes the > "DMA timeout with device 55" error for omap1. Okay, looks like I've missed some bit of muxing for DMA signals or something. I've yet to find any information on this in the OMAP5912 docs, so I guess I'm going to have to do this not only blind, but also without hardware. GAH. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was "up to 13.2Mbit". -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
