On 01/13/2014 09:03 AM, Taras Kondratiuk wrote: > From: Victor Kamensky <victor.kamensky@xxxxxxxxxx> > > Assembler functions defined in sleep44xx.S need to byteswap values > after read / before write from h/w register if code compiled in big > endian mode. Simple change to do 'rev x, x' before str instruction > and after ldr instruction that deals with h/w registers. > > Signed-off-by: Victor Kamensky <victor.kamensky@xxxxxxxxxx> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@xxxxxxxxxx> > --- > This is a part of RFC series [1]. > Based on v3.13-rc8. > > [1] http://www.spinics.net/lists/linux-omap/msg99927.html > > arch/arm/mach-omap2/sleep44xx.S | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > OMAP4 is LE, and if there is a gcc flag for the same, is'nt it cleaner to deal with it in Makefile rather than trying to make an assembly meant only for LE by force building it for BE? > diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S > index 9086ce0..8017016 100644 > --- a/arch/arm/mach-omap2/sleep44xx.S > +++ b/arch/arm/mach-omap2/sleep44xx.S > @@ -12,6 +12,7 @@ > #include <linux/linkage.h> > #include <asm/smp_scu.h> > #include <asm/memory.h> > +#include <asm/assembler.h> > #include <asm/hardware/cache-l2x0.h> > > #include "omap-secure.h" > @@ -74,6 +75,7 @@ ENTRY(omap4_finish_suspend) > */ > bl omap4_get_sar_ram_base > ldr r9, [r0, #OMAP_TYPE_OFFSET] > +ARM_BE8(rev r9, r9) > cmp r9, #0x1 @ Check for HS device > bne skip_secure_l1_clean > mov r0, #SCU_PM_NORMAL > @@ -113,12 +115,14 @@ skip_secure_l1_clean: > bl omap4_get_sar_ram_base > mov r8, r0 > ldr r9, [r8, #OMAP_TYPE_OFFSET] > +ARM_BE8(rev r9, r9) > cmp r9, #0x1 @ Check for HS device > bne scu_gp_set > mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR > ands r0, r0, #0x0f > ldreq r0, [r8, #SCU_OFFSET0] > ldrne r0, [r8, #SCU_OFFSET1] > +ARM_BE8(rev r0, r0) > mov r1, #0x00 > stmfd r13!, {r4-r12, r14} > ldr r12, =OMAP4_MON_SCU_PWR_INDEX > @@ -130,6 +134,7 @@ scu_gp_set: > ands r0, r0, #0x0f > ldreq r1, [r8, #SCU_OFFSET0] > ldrne r1, [r8, #SCU_OFFSET1] > +ARM_BE8(rev r1, r1) > bl omap4_get_scu_base > bl scu_power_mode > skip_scu_gp_set: > @@ -157,6 +162,7 @@ skip_scu_gp_set: > ands r5, r5, #0x0f > ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR > ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. > +ARM_BE8(rev r0, r0) > cmp r0, #3 > bne do_WFI > #ifdef CONFIG_PL310_ERRATA_727915 > @@ -167,9 +173,11 @@ skip_scu_gp_set: > bl omap4_get_l2cache_base > mov r2, r0 > ldr r0, =0xffff > +ARM_BE8(rev r0, r0) > str r0, [r2, #L2X0_CLEAN_INV_WAY] > wait: > ldr r0, [r2, #L2X0_CLEAN_INV_WAY] > +ARM_BE8(rev r0, r0) > ldr r1, =0xffff > ands r0, r0, r1 > bne wait > @@ -182,9 +190,11 @@ l2x_sync: > bl omap4_get_l2cache_base > mov r2, r0 > mov r0, #0x0 > +ARM_BE8(rev r0, r0) > str r0, [r2, #L2X0_CACHE_SYNC] > sync: > ldr r0, [r2, #L2X0_CACHE_SYNC] > +ARM_BE8(rev r0, r0) > ands r0, r0, #0x1 > bne sync > #endif > @@ -216,6 +226,7 @@ do_WFI: > bl omap4_get_sar_ram_base > mov r8, r0 > ldr r9, [r8, #OMAP_TYPE_OFFSET] > +ARM_BE8(rev r9, r9) > cmp r9, #0x1 @ Check for HS device > bne scu_gp_clear > mov r0, #SCU_PM_NORMAL > @@ -258,6 +269,7 @@ ENTRY(omap4_cpu_resume) > */ > ldr r8, =OMAP44XX_SAR_RAM_BASE > ldr r9, [r8, #OMAP_TYPE_OFFSET] > +ARM_BE8(rev r9, r9) > cmp r9, #0x1 @ Skip if GP device > bne skip_ns_smp_enable > mrc p15, 0, r0, c0, c0, 5 > @@ -292,16 +304,19 @@ skip_ns_smp_enable: > */ > ldr r2, =OMAP44XX_L2CACHE_BASE > ldr r0, [r2, #L2X0_CTRL] > +ARM_BE8(rev r0, r0) > and r0, #0x0f > cmp r0, #1 > beq skip_l2en @ Skip if already enabled > ldr r3, =OMAP44XX_SAR_RAM_BASE > ldr r1, [r3, #OMAP_TYPE_OFFSET] > +ARM_BE8(rev r1, r1) > cmp r1, #0x1 @ Check for HS device > bne set_gp_por > ldr r0, =OMAP4_PPA_L2_POR_INDEX > ldr r1, =OMAP44XX_SAR_RAM_BASE > ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] > +ARM_BE8(rev r4, r4) > adr r3, ppa_por_params > str r4, [r3, #0x04] > mov r1, #0x0 @ Process ID > @@ -313,11 +328,13 @@ skip_ns_smp_enable: > set_gp_por: > ldr r1, =OMAP44XX_SAR_RAM_BASE > ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] > +ARM_BE8(rev r0, r0) > ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH > DO_SMC > set_aux_ctrl: > ldr r1, =OMAP44XX_SAR_RAM_BASE > ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] > +ARM_BE8(rev r0, r0) > ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL > DO_SMC > mov r0, #0x1 > -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
