On Monday 06 January 2014 11:49 PM, Mark Rutland wrote:
On Fri, Dec 20, 2013 at 05:35:53PM +0000, Balaji T K wrote:Add pbias regulator node as a child of system control module - syscon. Signed-off-by: Balaji T K <balajitk@xxxxxx> --- arch/arm/boot/dts/dra7.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/omap2430.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/omap3.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/omap5.dtsi | 18 ++++++++++++++++++ 5 files changed, 90 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d0df4c4..4e68df1 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -110,6 +110,23 @@ ti,hwmods = "counter_32k"; }; + dra7_ctrl_general: tisyscon@4a002e00 { + compatible = "ti,control-syscon", "syscon", "simple-bus";Please, don't use simple-bus like that. The components below this node depend on it. It is _NOT_ a simple bus. Make the ti,control-syscon driver probe it's children.
Hi Mark, Actually ti,control-syscon driver does not exist, so I can remove it, and simple-bus is needed for child creation.
+ reg = <0x4a002e00 0x7c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0 0x4>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; +Thanks, Mark.
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
