Re: [PATCHv11 07/49] clk: divider: add support for low level ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>> * Tero Kristo <t-kristo@xxxxxx> [131219 03:26]:
>>> Divider clock can now be registered to use low level register access ops.
>>> Preferred initialization method is via clock description.
>>
>> This seems to make omap2 not boot for me. No output whatsoever even with
>> DEBUG_LL and earlyprintk.
> 
> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...

I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
what I see

[    0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    0.000000] pgd = c0004000
[    0.000000] [00000000] *pgd=00000000
[    0.000000] Internal error: Oops: 5 [#1] SMP ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
[    0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
[    0.000000] PC is at clk_mux_get_parent+0x14/0xcc
[    0.000000] LR is at clk_mux_get_parent+0x10/0xcc
[    0.000000] pc : [<c044a234>]    lr : [<c044a230>]    psr: a00001d3
[    0.000000] sp : c07d5f40  ip : 00000000  fp : 00000000
[    0.000000] r10: c07dc880  r9 : 4107b366  r8 : c07f46a4
[    0.000000] r7 : c0edfa80  r6 : ffffffff  r5 : c07f6810  r4 : 00000002
[    0.000000] r3 : 00000000  r2 : 00000000  r1 : c069da67  r0 : 00000002
[    0.000000] Flags: NzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 00c5387d  Table: 80004000  DAC: 00000017
[    0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
[    0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
[    0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
[    0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
[    0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
[    0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
[    0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
[    0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
[    0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
[    0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
[    0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
[    0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
[    0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
[    0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
[    0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
[    0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
[    0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000) 
[    0.000000] ---[ end trace 3406ff24bd97382e ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!

I'll try and debug further but any quick thoughts on what could be wrong?

> 
> -Tero
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux