Re: [PATCH 0/4] OMAPDSS: DT support for N900 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 18, 2013 at 10:55:37PM +0100, Sebastian Reichel wrote:
> On Tue, Dec 17, 2013 at 07:29:34PM +0200, Tomi Valkeinen wrote:
> > >> I added N900 display DT support on top of my v2 series, including
> > >> pinmuxing. Can you check if it looks right and works?
> > >>
> > >> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git work/dss-dt
> > > 
> > > I just tried it and it does not work. On a first look the pinmuxing
> > > looks fishy: 0x0d4 is muxed two times.
> > 
> > Hmm, so it is.
> > 
> > I'm not really familiar with SDI, I just muxed all the SDI pins, except
> > datapair3. I previously thought that there's only the data and clock
> > pairs for SDI, but the TRM revealed more sdi pins, so I included them.
> > It is well possible that these can be removed:
> > 
> > 0x0d0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data18.sdi_vsync */
> > 0x0d2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data19.sdi_hsync */
> > 0x0d4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data20.sdi_den */
> > 0x0d6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data21.sdi_stp */
> 
> Just removing the dss_data20.sdi_den pin was enough to get a working display. I
> don't know if the other pins are needed, because the display pins are already
> muxed correctly by the bootloader.

I just had a look in the leaked n900 schematics. According to it the
following pins are connected to the display:

DSS_DATA20 (E28)     GPIO 90         LCD_RST
DSS_DATA10 (AD28)    SDI_DAT1N       CDP 0
DSS_DATA11 (AD27)    SDI_DAT1P       CDP 1
DSS_DATA12 (AB28)    SDI_DAT2N       CDP 2
DSS_DATA13 (AB27)    SDI_DAT2P       CDP 3
DSS_DATA14 (AA28)    SDI_DAT3N       CDP 4
DSS_DATA15 (AA27)    SDI_DAT3P       CDP 5
DSS_DATA22 (AC27)    SDI_CLKP        CDP 6
DSS_DATA23 (AC28)    SDI_CLKN        CDP 7

I also noticed that dss_data19.sdi_hsync is used as gpio 89 for the
N900's proximity sensor. Thus I suggest the following SDI pin muxing:

	dss_sdi_pins: pinmux_dss_sdi_pins {
		pinctrl-single,pins = <
			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
			0x0c8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data14.sdi_dat3n */
			0x0ca (PIN_OUTPUT | MUX_MODE1)   /* dss_data15.sdi_dat3p */

			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
		>;
	};

-- Sebastian

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux