Use ctrl-macid driver to obtain the macids stored in the processor. This
is only done when defined in DT.
Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/cpsw.txt | 5 +++++
drivers/net/ethernet/ti/cpsw.c | 18 ++++++++++++++----
drivers/net/ethernet/ti/cpsw.h | 2 ++
3 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index c39f077..b95c38b 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -34,6 +34,11 @@ Required properties:
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : Specifies slave MAC address
+- ti,mac-address-ctrl : When cpsw-ctrl-macid support is compiledin, this can
+ be set to a phandle with one argument, see
+ cpsw-ctrl-macid.txt. If this method fails, cpsw falls
+ back to mac-address or random mac-address.
+
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5120d9c..382d793 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1804,9 +1804,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
- mac_addr = of_get_mac_address(slave_node);
- if (mac_addr)
- memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
+ ret = cpsw_ctrl_macid_read(slave_node, slave_data->mac_addr);
+ if (ret) {
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ mac_addr = of_get_mac_address(slave_node);
+ if (mac_addr)
+ memcpy(slave_data->mac_addr, mac_addr,
+ ETH_ALEN);
+ }
slave_data->phy_if = of_get_phy_mode(slave_node);
@@ -1946,10 +1953,13 @@ static int cpsw_probe(struct platform_device *pdev)
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);
- if (cpsw_probe_dt(&priv->data, pdev)) {
+ ret = cpsw_probe_dt(&priv->data, pdev);
+ if (ret == -EINVAL) {
pr_err("cpsw: platform data missing\n");
ret = -ENODEV;
goto clean_runtime_disable_ret;
+ } else if (ret) {
+ goto clean_runtime_disable_ret;
}
data = &priv->data;
diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
index 1b71067..222eebe 100644
--- a/drivers/net/ethernet/ti/cpsw.h
+++ b/drivers/net/ethernet/ti/cpsw.h
@@ -42,4 +42,6 @@ struct cpsw_platform_data {
void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave);
+int cpsw_ctrl_macid_read(struct device_node *np, u8 *mac_addr);
+
#endif /* __CPSW_H__ */
--
1.8.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
