* Tony Lindgren <tony@xxxxxxxxxxx> [131210 15:08]: > * Tony Lindgren <tony@xxxxxxxxxxx> [131210 11:28]: > > * Tony Lindgren <tony@xxxxxxxxxxx> [131210 11:00]: > > > * Paul Walmsley <paul@xxxxxxxxx> [131210 10:47]: > > > > On Mon, 9 Dec 2013, Tony Lindgren wrote: > > > > > > > > > The following changes since commit f2e2c9d9b4087b74eb9e00d8dfac148354cb0b71: > > > > > > > > > > ARM: dts: Fix booting for secure omaps (2013-12-06 15:30:43 -0800) > > > > > > > > > > are available in the git repository at: > > > > > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.14/omap3-board-removal-signed > > > > > > > > > > for you to fetch changes up to 736e812636ea72be444b85fa7e92554967459069: > > > > > > > > > > ARM: OMAP2+: Remove unused platform init code and headers (2013-12-08 14:15:46 -0800) > > > > > > > > The description in Tony's pull request below alludes to what regressions > > > > will occur when this is pulled. But just to state it in terms of what > > > > happened on the local testbed here when I tried it: > > > > > > > > - CM-T3517 booting will break since there's no .dts file for it. Are > > > > there other boards that will be affected here too? > > > > > > Yeah the cm-t3770 is on my todo list, but I've left it last as it's my > > > home router and has been behaving quite nicely. > > > > > > That should then cover: > > > > > > SBC-T3530 > > > http://compulab.co.il/products/sbcs/sbc-t3530/ > > > > > > SBC-T3517 > > > http://compulab.co.il/products/sbcs/sbc-t3517/ > > > > > > SBC-T3730 > > > http://compulab.co.il/products/sbcs/sbc-t3730/ > > > > > > They all seem to have the same baseboard, and the CPU module is > > > different. So getting the 3530 and 3517 variants working should > > > be trivial. I don't have 3530 or 3517 variants, so somebody else > > > will need to do those two. OK posted a patch for the SBC-T3730 with minimal support also for SBC-3530 and SBC-3517 that should boot far enough to start adding more devices. Paul, care to try it on the CM-T3517, the patch is: [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730 Let's hope there's two smsc911x devices also on the 3517 based board, otherwise it should have a completely separate .dts file. > > > And Nishant just posted a .dts file for the 3517 craneboard. > > > > And here's a list of other boards we don't have .dts file for if > > people have these: > > > > board-devkit8000.c omap3-ldp.dts or omap3-beagle.dts is a good starting point > > Oops, sorry this one we already have covered with omap3-devkit8000.dts. > And please ignore the multiple comments, they all are pretty close to > omap3-ldp and omap3-beagle. > > > board-omap3logic.c omap3-ldp.dts or omap3-beagle.dts is a good starting point > > board-omap3pandora.c omap3-ldp.dts or omap3-beagle.dts is a good starting point > > board-omap3stalker.c > > board-omap3touchbook.c > > > > For the ones above, omap3-ldp.dts or omap3-beagle.dts are good starting > > points. There's the DPI display pdata patch too, but it seems we want to > > wait to see if Tomi gets his display changes done before applying that. > > > > I don't have any of the ones above, so people using those please > > do the .dts files ASAP. > > > > Or send me those boards with working boot loaders and I'll do them at > > a rate of one board per day or so.. And then you're stuck with my > > criteria of "usable" which is usually serial port and NFS root unless > > I really like the board, mhuwahuaaaahh! > > > > board-ti8168evm.c > > > > I doubt ti8168evm has even worked for a long time.. It's in pretty > > sorry state unfortunately with missing clock support and missing > > handle_irq entry in the board-ti8168evm.c. > > > > Regards, > > > > Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
