The VPE and VIP IPs in DRA7x contain common scaler and color conversion hardware blocks. We create libraries for these components such that the vpe driver and the vip driver(in future) can use these library funcs to configure the blocks. There are some points for which I would like comments: - For VPE, setting the format and colorspace for the source and destination queues is enough to determine how these blocks need to be configured and whether they need to be bypassed or not. So it didn't make sense to represent them as media controller entities. For VIP(driver not upstream yet), it's possible that there are multiple data paths which may or may not include these blocks. However, the current use cases don't require such flexibility. There may be a need to re-consider a media controller like setup once we work on the VIP driver. Is it a good idea in terms of user-space compatibilty if we use media controller framework in the future. - These blocks will also require some custom control commands later on. For example, we may want to tell the scaler later on to perform bi-linear scaling, or perform peaking at a particular frequency. - The current series keeps the default scaler coefficients in a header file. These coefficients add a lot of lines of code in the kernel. Does it make more sense for the user application to pass the co-efficients to the kernel using an ioctl? Is there any driver which currenlty does this? The series is based on the branch: git://linuxtv.org/media_tree.git master Archit Taneja (8): v4l: ti-vpe: create a scaler block library v4l: ti-vpe: support loading of scaler coefficients v4l: ti-vpe: make vpe driver load scaler coefficients v4l: ti-vpe: enable basic scaler support v4l: ti-vpe: create a color space converter block library v4l: ti-vpe: Add helper to perform color conversion v4l: ti-vpe: enable CSC support for VPE v4l: ti-vpe: Add a type specifier to describe vpdma data format type drivers/media/platform/ti-vpe/Makefile | 2 +- drivers/media/platform/ti-vpe/csc.c | 196 +++++ drivers/media/platform/ti-vpe/csc.h | 68 ++ drivers/media/platform/ti-vpe/sc.c | 311 +++++++ drivers/media/platform/ti-vpe/sc.h | 208 +++++ drivers/media/platform/ti-vpe/sc_coeff.h | 1342 ++++++++++++++++++++++++++++++ drivers/media/platform/ti-vpe/vpdma.c | 36 +- drivers/media/platform/ti-vpe/vpdma.h | 7 + drivers/media/platform/ti-vpe/vpe.c | 251 ++++-- drivers/media/platform/ti-vpe/vpe_regs.h | 187 ----- 10 files changed, 2335 insertions(+), 273 deletions(-) create mode 100644 drivers/media/platform/ti-vpe/csc.c create mode 100644 drivers/media/platform/ti-vpe/csc.h create mode 100644 drivers/media/platform/ti-vpe/sc.c create mode 100644 drivers/media/platform/ti-vpe/sc.h create mode 100644 drivers/media/platform/ti-vpe/sc_coeff.h -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
