Re: [PATCHv2 07/10] drivers: mtd: m25p80: Adapt driver to support memory mapped read.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 06, 2013 at 07:54:48PM +0530, Sourav Poddar wrote:
> Adapt driver to do a memory mapped read.
> @@ -109,6 +109,7 @@ struct m25p {
>  	u8			program_opcode;
>  	u8			*command;
>  	enum read_type		flash_read;
> +	void __iomem *mem_addr;

I think we can remove this field.
You can use a local variable in the m25p80_read.

>  };
>  
>  static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
> @@ -515,6 +516,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
>  	size_t *retlen, u_char *buf)
>  {
>  	struct m25p *flash = mtd_to_m25p(mtd);
> +	struct spi_master *master = flash->spi->master;
>  	struct spi_transfer t[2];
>  	struct spi_message m;
>  	uint8_t opcode;
> @@ -523,6 +525,20 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
>  	pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
>  			__func__, (u32)from, len);
>  
> +	if (master->mmap) {
> +		mutex_lock(&flash->lock);
> +		/* Wait till previous write/erase is done. */
> +		if (wait_till_ready(flash)) {
> +			mutex_unlock(&flash->lock);
> +			return 1;
> +		}
> +		flash->mem_addr = master->get_buf(master);
> +		memcpy(buf, flash->mem_addr + from, len);
> +		master->put_buf(master);
> +		*retlen = len;
> +		goto out;
> +	}
> +
>  	spi_message_init(&m);
>  	memset(t, 0, (sizeof t));
>  
> @@ -558,6 +574,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
>  
>  	*retlen = m.actual_length - m25p_cmdsz(flash) - dummy;
>  
> +out:
>  	mutex_unlock(&flash->lock);
>  
>  	return 0;
> @@ -1286,6 +1303,9 @@ static int m25p_probe(struct spi_device *spi)
>  		flash->addr_width = 3;
>  	}
>  
> +	if (spi->master->configure_from_slave)
> +		m25p80_fill_flash_information(flash);
> +
You have add a configure_from_slave hook in the SPI, why you also need 
a same hook in the SPI-NOR framework?

And i think the enable_mmap/disable_mmap is not needed too.

All the three hooks are used to set the SPI bus controller.

And the SPI-NOR framework only handles the issues between the 
SPI bus controller and the SPI-NOR, or the SPI-NOR controller and the
SPI-NOR.

thanks
Huang Shijie


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux