On Wednesday 11 December 2013 12:08 PM, Vivek Gautam wrote:
> Hi,
>
>
> On Tue, Dec 10, 2013 at 7:31 PM, Heikki Krogerus
> <heikki.krogerus@xxxxxxxxxxxxxxx> wrote:
>> Hi,
>
> Thanks for reviewing this.
>
>>
>> On Tue, Dec 10, 2013 at 04:25:23PM +0530, Vivek Gautam wrote:
>>> Some PHY controllers may need to tune PHY post-initialization,
>>> so that the PHY consumers can call phy-tuning at appropriate
>>> point of time.
>>>
>>> Signed-off-by: vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>>> ---
>>> drivers/phy/phy-core.c | 20 ++++++++++++++++++++
>>> include/linux/phy/phy.h | 7 +++++++
>>> 2 files changed, 27 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
>>> index 03cf8fb..68dbb90 100644
>>> --- a/drivers/phy/phy-core.c
>>> +++ b/drivers/phy/phy-core.c
>>> @@ -239,6 +239,26 @@ out:
>>> }
>>> EXPORT_SYMBOL_GPL(phy_power_off);
>>>
>>> +int phy_tune(struct phy *phy)
>>> +{
>>> + int ret = -ENOTSUPP;
>>> +
>>> + mutex_lock(&phy->mutex);
>>> + if (phy->ops->tune) {
>>> + ret = phy->ops->tune(phy);
>>> + if (ret < 0) {
>>> + dev_err(&phy->dev, "phy tuning failed --> %d\n", ret);
>>> + goto out;
>>> + }
>>> + }
>>> +
>>> +out:
>>> + mutex_unlock(&phy->mutex);
>>> +
>>> + return ret;
>>> +}
>>> +EXPORT_SYMBOL_GPL(phy_tune);
>>
>> I think "setup" instead of "tune" is much more clear and reusable.
>
> I think "setup" will look more like first time setting up the phy,
> which is rather served by "init" callback.
> This i thought would serve the purpose of over-riding certain PHY
> parameters, which would not have been
> possible at "init" time.
> Please correct my thinking if i am unable to understand your point here.
how about 'calibrate'?
Thanks
Kishon
>
>>
>> Thanks,
>>
>> --
>> heikki
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
