On Tuesday 10 December 2013 04:39 PM, Ulf Hansson wrote:
On 21 November 2013 15:20, Balaji T K <balajitk@xxxxxx> wrote:handle vcc and vcc_aux independently to reduce indent. Signed-off-by: Balaji T K <balajitk@xxxxxx> --- drivers/mmc/host/omap_hsmmc.c | 54 +++++++++++++++++++---------------------- 1 files changed, 25 insertions(+), 29 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 1eb4350..342be25 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -286,11 +286,12 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, * chips/cards need an interface voltage rail too. */ if (power_on) { - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); + if (host->vcc) + ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); /* Enable interface voltage rail, if needed */ if (ret == 0 && host->vcc_aux) { ret = regulator_enable(host->vcc_aux); - if (ret < 0) + if (ret < 0 && host->vcc) ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); } @@ -298,7 +299,7 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, /* Shut down the rail */ if (host->vcc_aux) ret = regulator_disable(host->vcc_aux); - if (!ret) { + if (host->vcc) { /* Then proceed to shut down the local regulator */ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); @@ -318,10 +319,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) reg = devm_regulator_get(host->dev, "vmmc"); if (IS_ERR(reg)) { - dev_err(host->dev, "vmmc regulator missing\n"); + dev_err(host->dev, "unable to get vmmc regulator %ld\n", + PTR_ERR(reg)); return PTR_ERR(reg); } else { - mmc_slot(host).set_power = omap_hsmmc_set_power; host->vcc = reg; ocr_value = mmc_regulator_get_ocrmask(reg); if (!mmc_slot(host).ocr_mask) { @@ -334,31 +335,26 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) return -EINVAL; } } + } + mmc_slot(host).set_power = omap_hsmmc_set_power; - /* Allow an aux regulator */ - reg = devm_regulator_get_optional(host->dev, "vmmc_aux"); - host->vcc_aux = IS_ERR(reg) ? NULL : reg; + /* Allow an aux regulator */ + reg = devm_regulator_get_optional(host->dev, "vmmc_aux"); + host->vcc_aux = IS_ERR(reg) ? NULL : reg; - /* For eMMC do not power off when not in sleep state */ - if (mmc_slot(host).no_regulator_off_init) - return 0; - /* - * UGLY HACK: workaround regulator framework bugs. - * When the bootloader leaves a supply active, it's - * initialized with zero usecount ... and we can't - * disable it without first enabling it. Until the - * framework is fixed, we need a workaround like this - * (which is safe for MMC, but not in general). - */The above problem is handled by the mmc core layer. I certainly think you shall adopt your code to it.
Hi Ulf, how about optional vqmmc, omap_hsmmc does call mmc_regulator_set_ocr for vmmc Am I missing something?
Kind regards Ulf Hansson- if (regulator_is_enabled(host->vcc) > 0 || - (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) { - int vdd = ffs(mmc_slot(host).ocr_mask) - 1; + /* For eMMC do not power off when not in sleep state */ + if (mmc_slot(host).no_regulator_off_init) + return 0; + /* + * To disable boot_on regulator, enable regulator + * to increase usecount and then disable it. + */ + if ((host->vcc && regulator_is_enabled(host->vcc) > 0) || + (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) { + int vdd = ffs(mmc_slot(host).ocr_mask) - 1; - mmc_slot(host).set_power(host->dev, host->slot_id, - 1, vdd); - mmc_slot(host).set_power(host->dev, host->slot_id, - 0, 0); - } + mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); } return 0; -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
