[PATCH v4 3/7] regulator: add pbias regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.

Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
 .../bindings/regulator/pbias-regulator.txt         |   21 ++
 drivers/regulator/Kconfig                          |    9 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/pbias-regulator.c                |  232 ++++++++++++++++++++
 4 files changed, 263 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt
 create mode 100644 drivers/regulator/pbias-regulator.c

diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 0000000..712fcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,21 @@
+PBIAS internal regulator for SD card i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - "regulator-pbias-omap2" for OMAP2
+  - "regulator-pbias-omap3" for OMAP3
+  - "regulator-pbias-omap4" for OMAP4
+  - "regulator-pbias-omap5" for OMAP5, DRA7
+- pbias-reg-offset: PBIAS control register offset from syscon base address
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+		pbias_regulator: pbias_regulator {
+			pbias-reg-offset = <0>;
+			regulator-name = "pbias_regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+	};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ce785f4..de57611 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -369,6 +369,15 @@ config REGULATOR_PALMAS
 	  on the muxing. This is handled automatically in the driver by
 	  reading the mux info from OTP.
 
+config REGULATOR_PBIAS
+	tristate "PBIAS OMAP regulator driver"
+	depends on ARCH_OMAP && MFD_SYSCON
+	help
+	 Say y here to support pbias regulator for mmc1:SD card i/o
+	 on OMAP SoCs.
+	 This driver provides support for OMAP pbias modelled
+	 regulators.
+
 config REGULATOR_PCAP
 	tristate "Motorola PCAP2 regulator driver"
 	depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 01c597e..16000fa 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
new file mode 100644
index 0000000..ae902d8
--- /dev/null
+++ b/drivers/regulator/pbias-regulator.c
@@ -0,0 +1,232 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+	u32 enable;
+	u32 enable_mask;
+	u32 vmode;
+	char *name;
+};
+
+struct pbias_regulator_data {
+	struct regulator_desc desc;
+	void __iomem *pbias_addr;
+	unsigned int pbias_reg;
+	struct regulator_dev *dev;
+	struct regmap *syscon;
+	const struct pbias_reg_info *info;
+	int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+			int min_uV, int max_uV, unsigned *selector)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+	const struct pbias_reg_info *info = data->info;
+	int ret, vmode;
+
+	if (min_uV <= 1800000)
+		vmode = 0;
+	else if (min_uV > 1800000)
+		vmode = info->vmode;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+						info->vmode, vmode);
+	data->voltage = min_uV;
+
+	return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+
+	return data->voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int ret;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+					info->enable_mask, info->enable);
+
+	return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int ret;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+						info->enable_mask, 0);
+	return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int value;
+
+	regmap_read(data->syscon, data->pbias_reg, &value);
+
+	return value & info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+	.set_voltage	= pbias_regulator_set_voltage,
+	.get_voltage	= pbias_regulator_get_voltage,
+	.enable		= pbias_regulator_enable,
+	.disable	= pbias_regulator_disable,
+	.is_enabled	= pbias_regulator_is_enable,
+};
+
+#if CONFIG_OF
+static const struct pbias_reg_info pbias_omap3 = {
+	.enable = BIT(1),
+	.enable_mask = BIT(1),
+	.vmode = BIT(0),
+	.name = "pbias_omap3"
+};
+
+static const struct pbias_reg_info pbias_omap4 = {
+	.enable = BIT(26) | BIT(22),
+	.enable_mask = BIT(26) | BIT(25) | BIT(22),
+	.vmode = BIT(21),
+	.name = "pbias_omap4"
+};
+
+static const struct pbias_reg_info pbias_omap5 = {
+	.enable = BIT(27) | BIT(26),
+	.enable_mask = BIT(27) | BIT(25) | BIT(26),
+	.vmode = BIT(21),
+	.name = "pbias_omap5"
+};
+
+static const struct of_device_id pbias_of_match[] = {
+	{ .compatible = "regulator-pbias-omap3", .data = &pbias_omap3},
+	{ .compatible = "regulator-pbias-omap4", .data = &pbias_omap4},
+	{ .compatible = "regulator-pbias-omap5", .data = &pbias_omap5},
+	{},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+#endif
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	struct pbias_regulator_data *drvdata;
+	const struct of_device_id *id;
+	struct regulator_init_data *initdata;
+	struct regulator_config cfg = { };
+	int ret;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data),
+			       GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate device data\n");
+		return -ENOMEM;
+	}
+
+	id = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	drvdata->info = id->data;
+	if (!drvdata->info)
+		return -ENODEV;
+
+	initdata = of_get_regulator_init_data(&pdev->dev, np);
+	if (!initdata)
+		return -EINVAL;
+
+	ret = of_property_read_u32(np, "pbias-reg-offset",
+				   &drvdata->pbias_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "no pbias-reg-offset property set\n");
+		return ret;
+	}
+
+	syscon_np = of_get_parent(np);
+	if (!syscon_np)
+		return -ENODEV;
+
+	drvdata->syscon = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(drvdata->syscon))
+		return PTR_ERR(drvdata->syscon);
+
+	drvdata->desc.name = drvdata->info->name;
+	drvdata->desc.owner = THIS_MODULE;
+	drvdata->desc.type = REGULATOR_VOLTAGE;
+	drvdata->desc.ops = &pbias_regulator_voltage_ops;
+	drvdata->desc.n_voltages = 3;
+
+	cfg.dev = &pdev->dev;
+	cfg.init_data = initdata;
+	cfg.driver_data = drvdata;
+	cfg.of_node = np;
+
+	drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
+									&cfg);
+	if (IS_ERR(drvdata->dev)) {
+		ret = PTR_ERR(drvdata->dev);
+		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+	return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+	.probe		= pbias_regulator_probe,
+	.driver		= {
+		.name		= "pbias-regulator",
+		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(pbias_of_match),
+	},
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@xxxxxx>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux