Re: [PATCHv2 09/10] arm: dts: dra7: Add qspi device.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 09 December 2013 11:12 PM, Tony Lindgren wrote:
* Sourav Poddar<sourav.poddar@xxxxxx>  [131206 06:29]:
These add device tree entry for qspi controller driver on dra7.
FYI these .dts changes need to be queued separately by Benoit and
should be posted as a seprate series in general to avoid confusion.

Ok, thanks!
I posted this for review along with other code changes.

I will post them seperately to Benoit.
Regards,

Tony

Signed-off-by: Sourav Poddar<sourav.poddar@xxxxxx>
---
v1->v2:
use "MUX_MODE1" instead of numeric value
  arch/arm/boot/dts/dra7-evm.dts |   32 ++++++++++++++++++++++++++++++++
  arch/arm/boot/dts/dra7.dtsi    |   13 +++++++++++++
  2 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5babba0..4a57fdf 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,21 @@
  			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
  		>;
  	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins =<
+			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
  };

  &i2c1 {
@@ -273,3 +288,20 @@
  &cpu0 {
  	cpu0-supply =<&smps123_reg>;
  };
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =<&qspi1_pins>;
+
+	spi-max-frequency =<48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency =<48000000>;
+		reg =<0>;
+		spi-tx-bus-width =<1>;
+		spi-rx-bus-width =<4>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 67275c8..b06d899 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -582,6 +582,19 @@
  			dma-names = "tx0", "rx0";
  			status = "disabled";
  		};
+
+		qspi: qspi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg =<0x4b300000 0x100>,<0x4a002558 0x4>,
+					<0x5c000000 0x3ffffff>;
+			reg-names = "qspi_base", "qspi_ctrlmod", "qspi_mmap";
+			#address-cells =<1>;
+			#size-cells =<0>;
+			ti,hwmods = "qspi";
+			num-cs =<4>;
+			interrupts =<0 124 0x4>;
+			status = "disabled";
+		};
  	};

  	clocks {
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux