Hi Peter, 2013/12/5 Peter Meerwald <pmeerw@xxxxxxxxxx>: > Hello, > > on OMAP3, the NAND area holding MLO and u-boot need a different ECC scheme > (hw) than the rootfs (sw) > There is some discussion around this, please take a look at this thread, http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg98969.html > is there a way to tell the kernel which ECC scheme to use on a > per-partition basis? > At this moment this is not possible. > I'd like to be able to update MLO and u-boot from within a booted Linux > system on the device (I have to resort to u-boot for that where I can > control the ECC scheme used) > Meanwhile, to do this we use a small userspace program created by Javier Martinez in order to flash the MLO in our OMAP3 boards. See http://git.isee.biz/?p=pub/scm/writeloader.git;a=summary Hope it helps you. Regards, Enric > thanks, regards, p. > > -- > > Peter Meerwald > +43-664-2444418 (mobile) > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
