As a temporary solution to enable DSS for selected boards when booting
with DT, a hack was added to board-generic.c in
63d5fc0c2f748e20f38a0a0ec1c8494bddf5c288 (OMAP: board-generic: enable
DSS for panda & sdp boards).
We're now adding proper DT support, so the hack can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/dss-common.c | 259 -------------------------------------
arch/arm/mach-omap2/dss-common.h | 13 --
arch/arm/mach-omap2/pdata-quirks.c | 4 -
4 files changed, 1 insertion(+), 277 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dss-common.c
delete mode 100644 arch/arm/mach-omap2/dss-common.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e99c05..5b6456d1d266 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -296,4 +296,4 @@ endif
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
obj-y += $(emac-m) $(emac-y)
-obj-y += common-board-devices.o twl-common.o dss-common.o
+obj-y += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
deleted file mode 100644
index 365bfd3d9c68..000000000000
--- a/arch/arm/mach-omap2/dss-common.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments, Inc..
- * Author: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "dss-common.h"
-#include "mux.h"
-
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD 63 /* Hotplug detect */
-
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 2,
-};
-
-static struct platform_device omap4_panda_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap4_panda_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap4_panda_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap4_panda_tfp410_pdata,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device omap4_panda_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &omap4_panda_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device omap4_panda_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &omap4_panda_tpd_pdata,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap4_panda_display_init_of(void)
-{
- omap_display_init(&omap4_panda_dss_data);
-
- platform_device_register(&omap4_panda_tfp410_device);
- platform_device_register(&omap4_panda_dvi_connector_device);
-
- platform_device_register(&omap4_panda_tpd_device);
- platform_device_register(&omap4_panda_hdmi_connector_device);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO 40
-
-static struct panel_dsicm_platform_data dsi1_panel = {
- .name = "lcd",
- .source = "dsi.0",
- .reset_gpio = 102,
- .use_ext_te = false,
- .ext_te_gpio = 101,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd_device = {
- .name = "panel-dsi-cm",
- .id = 0,
- .dev.platform_data = &dsi1_panel,
-};
-
-static struct panel_dsicm_platform_data dsi2_panel = {
- .name = "lcd2",
- .source = "dsi.1",
- .reset_gpio = 104,
- .use_ext_te = false,
- .ext_te_gpio = 103,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd2_device = {
- .name = "panel-dsi-cm",
- .id = 1,
- .dev.platform_data = &dsi2_panel,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device sdp4430_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &sdp4430_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device sdp4430_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &sdp4430_tpd_pdata,
-};
-
-
-static struct omap_dss_board_info sdp4430_dss_data = {
- .default_display_name = "lcd",
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init_of(void)
-{
- int r;
-
- r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
- "display_sel");
- if (r)
- pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
- r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
- "DLP POWER ON");
- if (r)
- pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
- omap_display_init(&sdp4430_dss_data);
-
- platform_device_register(&sdp4430_lcd_device);
- platform_device_register(&sdp4430_lcd2_device);
-
- platform_device_register(&sdp4430_tpd_device);
- platform_device_register(&sdp4430_hdmi_connector_device);
-}
-
-
-/* OMAP3 IGEPv2 data */
-
-#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 3,
-};
-
-static struct platform_device omap3_igep2_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap3_igep2_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap3_igep2_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap3_igep2_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap3_igep2_display_init_of(void)
-{
- omap_display_init(&igep2_dss_data);
-
- platform_device_register(&omap3_igep2_tfp410_device);
- platform_device_register(&omap3_igep2_dvi_connector_device);
-}
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
deleted file mode 100644
index a9becf0d5be8..000000000000
--- a/arch/arm/mach-omap2/dss-common.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __OMAP_DSS_COMMON__
-#define __OMAP_DSS_COMMON__
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init_of(void);
-void __init omap3_igep2_display_init_of(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 10c71450cf63..ff5b48eca778 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -18,7 +18,6 @@
#include "common.h"
#include "common-board-devices.h"
-#include "dss-common.h"
#include "control.h"
struct pdata_init {
@@ -80,7 +79,6 @@ static void __init hsmmc2_internal_input_clk(void)
static void __init omap3_igep0020_legacy_init(void)
{
- omap3_igep2_display_init_of();
}
static void __init omap3_evm_legacy_init(void)
@@ -97,14 +95,12 @@ static void __init omap3_zoom_legacy_init(void)
#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_sdp_legacy_init(void)
{
- omap_4430sdp_display_init_of();
legacy_init_wl12xx(WL12XX_REFCLOCK_26,
WL12XX_TCXOCLOCK_26, 53);
}
static void __init omap4_panda_legacy_init(void)
{
- omap4_panda_display_init_of();
legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
