Hi Laurent,
On Friday 09 August 2013 03:41 AM, Laurent Pinchart wrote:
Hi Archit,
Thank you for the patch.
On Friday 02 August 2013 19:33:43 Archit Taneja wrote:
Add a DT node for VPE in dra7.dtsi. This is experimental because we might
need to split the VPE address space a bit more, and also because the IRQ
line described is accessible the IRQ crossbar driver is added for DRA7XX.
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Sricharan R <r.sricharan@xxxxxx>
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
Documentation is missing :-) As this is an experimental patch you can probably
document the bindings later.
Sorry for the late reply, I missed out on reading this message somehow.
I'm blocked on adding the DT nodes because of some dependencies on dra7x
clocks, and the crossbar framework. I'll make sure to add documentation :)
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..3237972 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -484,6 +484,17 @@
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
+
+ vpe {
+ compatible = "ti,vpe";
+ ti,hwmods = "vpe";
+ reg = <0x489d0000 0xd000>, <0x489dd000 0x400>;
+ reg-names = "vpe", "vpdma";
+ interrupts = <0 159 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
Are #address-cells and #size-cells really needed ?
They aren't needed. The vpe node inherits these params from the parent
"ocp" node.
Thanks,
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
