Legacy board files in mach-omap2 used the helper functions
board_{nor,nand,onenand}_init() to initialize the flash
devices attached to the GPMC.
With Device Tree booting the initialization is handled by
the GPMC driver gpmc_probe_*_child() functions so this
code is not needed anymore now that OMAP2+ is DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/Makefile | 4 -
arch/arm/mach-omap2/board-flash.c | 245 --------------------------------------
arch/arm/mach-omap2/board-flash.h | 62 ----------
3 files changed, 311 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-flash.c
delete mode 100644 arch/arm/mach-omap2/board-flash.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d10feb..48b6631 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -235,10 +235,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
# Platform specific device init code
-omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
-obj-y += $(omap-flash-y) $(omap-flash-m)
-
obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
deleted file mode 100644
index ac82512..0000000
--- a/arch/arm/mach-omap2/board-flash.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * board-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "soc.h"
-#include "common.h"
-#include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
-
-#define REG_FPGA_REV 0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
-#define MAX_SUPPORTED_GPMC_CONFIG 3
-
-#define DEBUG_BASE 0x08000000 /* debug board */
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */
-
-static struct physmap_flash_data board_nor_data = {
- .width = 2,
-};
-
-static struct resource board_nor_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device board_nor_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &board_nor_data,
- },
- .num_resources = 1,
- .resource = &board_nor_resource,
-};
-
-static void
-__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
- int err;
-
- board_nor_data.parts = nor_parts;
- board_nor_data.nr_parts = nr_parts;
-
- /* Configure start address and size of NOR device */
- if (omap_rev() >= OMAP3430_REV_ES1_0) {
- err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
- (unsigned long *)&board_nor_resource.start);
- board_nor_resource.end = board_nor_resource.start
- + FLASH_SIZE_SDPV2 - 1;
- } else {
- err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
- (unsigned long *)&board_nor_resource.start);
- board_nor_resource.end = board_nor_resource.start
- + FLASH_SIZE_SDPV1 - 1;
- }
- if (err < 0) {
- pr_err("NOR: Can't request GPMC CS\n");
- return;
- }
- if (platform_device_register(&board_nor_device) < 0)
- pr_err("Unable to register NOR device\n");
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data = {
- .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
-};
-
-void
-__init board_onenand_init(struct mtd_partition *onenand_parts,
- u8 nr_parts, u8 cs)
-{
- board_onenand_data.cs = cs;
- board_onenand_data.parts = onenand_parts;
- board_onenand_data.nr_parts = nr_parts;
-
- gpmc_onenand_init(&board_onenand_data);
-}
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
- defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-/* Note that all values in this struct are in nanoseconds */
-struct gpmc_timings nand_default_timings[1] = {
- {
- .sync_clk = 0,
-
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
-
- .we_on = 6,
- .oe_on = 6,
-
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
-
- .we_off = 30,
- .oe_off = 48,
-
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
- },
-};
-
-static struct omap_nand_platform_data board_nand_data;
-
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
- int nand_type, struct gpmc_timings *gpmc_t)
-{
- board_nand_data.cs = cs;
- board_nand_data.parts = nand_parts;
- board_nand_data.nr_parts = nr_parts;
- board_nand_data.devsize = nand_type;
-
- board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
- gpmc_nand_init(&board_nand_data, gpmc_t);
-}
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
- u8 cs = 0;
- void __iomem *fpga_map_addr;
-
- fpga_map_addr = ioremap(DEBUG_BASE, 4096);
- if (!fpga_map_addr)
- return -ENOMEM;
-
- if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
- /* we dont have an DEBUG FPGA??? */
- /* Depend on #defines!! default to strata boot return param */
- goto unmap;
-
- /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
- cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
- /* ES2.0 SDP's onwards 4 dip switches are provided for CS */
- if (omap_rev() >= OMAP3430_REV_ES1_0)
- /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
- cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
- ((cs & 2) << 1) | ((cs & 1) << 3);
- else
- /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
- cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
- iounmap(fpga_map_addr);
- return cs;
-}
-
-/**
- * board_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init board_flash_init(struct flash_partitions partition_info[],
- char chip_sel_board[][GPMC_CS_NUM], int nand_type)
-{
- u8 cs = 0;
- u8 norcs = GPMC_CS_NUM + 1;
- u8 nandcs = GPMC_CS_NUM + 1;
- u8 onenandcs = GPMC_CS_NUM + 1;
- u8 idx;
- unsigned char *config_sel = NULL;
-
- /* REVISIT: Is this return correct idx for 2430 SDP?
- * for which cs configuration matches for 2430 SDP?
- */
- idx = get_gpmc0_type();
- if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
- pr_err("%s: Invalid chip select: %d\n", __func__, cs);
- return;
- }
- config_sel = (unsigned char *)(chip_sel_board[idx]);
-
- while (cs < GPMC_CS_NUM) {
- switch (config_sel[cs]) {
- case PDC_NOR:
- if (norcs > GPMC_CS_NUM)
- norcs = cs;
- break;
- case PDC_NAND:
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- break;
- case PDC_ONENAND:
- if (onenandcs > GPMC_CS_NUM)
- onenandcs = cs;
- break;
- }
- cs++;
- }
-
- if (norcs > GPMC_CS_NUM)
- pr_err("NOR: Unable to find configuration in GPMC\n");
- else
- board_nor_init(partition_info[0].parts,
- partition_info[0].nr_parts, norcs);
-
- if (onenandcs > GPMC_CS_NUM)
- pr_err("OneNAND: Unable to find configuration in GPMC\n");
- else
- board_onenand_init(partition_info[1].parts,
- partition_info[1].nr_parts, onenandcs);
-
- if (nandcs > GPMC_CS_NUM)
- pr_err("NAND: Unable to find configuration in GPMC\n");
- else
- board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs,
- nand_type, nand_default_timings);
-}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
deleted file mode 100644
index 2fb5d41..0000000
--- a/arch/arm/mach-omap2/board-flash.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * board-sdp.h
- *
- * Information structures for SDP-specific board config data
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include "gpmc.h"
-
-#define PDC_NOR 1
-#define PDC_NAND 2
-#define PDC_ONENAND 3
-#define DBG_MPDB 4
-
-struct flash_partitions {
- struct mtd_partition *parts;
- int nr_parts;
-};
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
- defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
- defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_flash_init(struct flash_partitions [],
- char chip_sel[][GPMC_CS_NUM], int nand_type);
-#else
-static inline void board_flash_init(struct flash_partitions part[],
- char chip_sel[][GPMC_CS_NUM], int nand_type)
-{
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
- defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
-extern struct gpmc_timings nand_default_timings[];
-#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
-{
-}
-#define nand_default_timings NULL
-#endif
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_onenand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs);
-#else
-static inline void board_onenand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs)
-{
-}
-#endif
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
