Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx> writes: > Op 23 jan 2009, om 13:00 heeft Nayak, Rajendra het volgende geschreven: > >> >> >>> -----Original Message----- >>> From: Högander Jouni [mailto:jouni.hogander@xxxxxxxxx] >>> Sent: Friday, January 23, 2009 4:52 PM >>> To: Nayak, Rajendra >>> Cc: Kevin Hilman; linux-omap@xxxxxxxxxxxxxxx >>> Subject: Re: new PM branch available >>> >>> "ext Nayak, Rajendra" <rnayak@xxxxxx> writes: >>> >>>>> I did some testing today on my 3.0GP 3430SDP. This is with >>> the omap_3430sdp_min_defconfig. >>>>> >>>>> 1) Idle. >>>>> echo -n 1 > /sys/power/clocks_off_while_idle >>>>> echo -n 1 > /sys/power/enable_off >>>>> Could not hit RET. something seems to be still active. Not >>> sure if it could be something >>>>> to do with this error that's thrown while bootup >>>>> >>>>> <6>Disabling unused clock "dpll5_ck" >>>>> Disabling unused clock "dpll5_ck" >>>>> <3>clock: dpll5_ck failed transition to 'locked' >>>>> clock: dpll5_ck failed transition to 'locked' >>>>> >>>>> This is the same results I see on my SDP. >>>>> >>>>> Looking at the registers, I am pretty sure it is the D2D >>> clockdomain >>>>> that still has activity, but due to very poor Stacked-mode >>> docs and no >>>>> responses to the D2D questions asked to TI I have not been able to >>>>> figure this one out. >>>>> >>>>> Help debugging this would be greatly appreciated. >>>> >>>> I looked some more into this today and saw that the hang is >>> indeed caused >>>> due to some kind of debug console going dead. The system >>> was still looping in the >>>> idle thread. I could even do a telnet remotely to my board and take >>>> some debug dumps.. >>> >>> This might help you: >> >> Yup, this does help. There's no hang now either in idle or in suspend. >> Not sure why this was affecting only the SDP while the pm branch seems >> to function without this for beagle and other omap3 platforms? > > I get 'hangs' on the beagle as well with the PM branch. They mostly > seem to happen when I boot a fresh rootfs and the packagemanager runs > a lot of postinst scripts without any form of user interaction. > Koen, What are your /sys/power/clocks_off_while_idle and ../sleep_while_idle set to? Do you see the hangs when both of these are zero? Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
