From: Victor Kamensky <victor.kamensky@xxxxxxxxxx> All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@xxxxxxxxxx> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@xxxxxxxxxx> --- Posting this as a saparate patch out of RFC series. RFC: http://patchwork.ozlabs.org/patch/291726/ Only minor comment change is done since RFC patch. Based on v3.13-rc1 drivers/i2c/busses/i2c-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d76228d..90dcc2e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = { static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, int reg, u16 val) { - __raw_writew(val, i2c_dev->base + + writew_relaxed(val, i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) { - return __raw_readw(i2c_dev->base + + return readw_relaxed(i2c_dev->base + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } @@ -1162,9 +1162,9 @@ omap_i2c_probe(struct platform_device *pdev) * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2. * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset. * Also since the omap_i2c_read_reg uses reg_map_ip_* a - * raw_readw is done. + * readw_relaxed is done. */ - rev = __raw_readw(dev->base + 0x04); + rev = readw_relaxed(dev->base + 0x04); dev->scheme = OMAP_I2C_SCHEME(rev); switch (dev->scheme) { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
