+ Kevin
On Monday 18 November 2013 03:49 AM, Daniel Mack wrote:
> This patch makes the edma driver resume correctly after suspend. Tested
> on an AM33xx platform with cyclic audio streams and omap_hsmmc.
>
> All information can be reconstructed by already known runtime
> information.
>
> As we now use some functions that were previously only used from __init
> context, annotations had to be dropped.
>
> [nm@xxxxxx: added error handling for runtime + suspend_late/early_resume]
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> Signed-off-by: Daniel Mack <zonque@xxxxxxxxx>
> Tested-by: Joel Fernandes <joelf@xxxxxx>
> Acked-by: Joel Fernandes <joelf@xxxxxx>
> ---
>
> v6:
> amended version from Nishanth Menon, adding error handling for runtime,
> and using suspend_late/early_resume.
>
>
> arch/arm/common/edma.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 91 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index 8e1a024..e2b9638 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -239,6 +239,8 @@ struct edma {
> /* list of channels with no even trigger; terminated by "-1" */
> const s8 *noevent;
>
> + struct edma_soc_info *info;
> +
> /* The edma_inuse bit for each PaRAM slot is clear unless the
> * channel is in use ... by ARM or DSP, for QDMA, or whatever.
> */
> @@ -290,13 +292,13 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
> ~(0x7 << bit), queue_no << bit);
> }
>
> -static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
> +static void map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
> {
> int bit = queue_no * 4;
> edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
> }
>
> -static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
> +static void assign_priority_to_queue(unsigned ctlr, int queue_no,
> int priority)
> {
> int bit = queue_no * 4;
> @@ -315,7 +317,7 @@ static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
> * included in that particular EDMA variant (Eg : dm646x)
> *
> */
> -static void __init map_dmach_param(unsigned ctlr)
> +static void map_dmach_param(unsigned ctlr)
> {
> int i;
> for (i = 0; i < EDMA_MAX_DMACH; i++)
> @@ -1785,15 +1787,101 @@ static int edma_probe(struct platform_device *pdev)
> edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
> edma_write_array(j, EDMA_QRAE, i, 0x0);
> }
> + edma_cc[j]->info = info[j];
> arch_num_cc++;
> }
>
> return 0;
> }
>
> +static int edma_pm_suspend(struct device *dev)
> +{
> + int j, r;
> +
> + r = pm_runtime_get_sync(dev);
> + if (IS_ERR_VALUE(r)) {
So IS_ERR_VALUE() is only for functions which may return a negative
number outside of MAX_ERRNO as a success indication.
pm_runtime_get_sync() does not appear to be one of them so just use"
if (r < 0) { .. }
> + dev_err(dev, "%s: get_sync returned %d\n", __func__, r);
> + return r;
> + }
> +
> + for (j = 0; j < arch_num_cc; j++) {
> + struct edma *ecc = edma_cc[j];
> +
> + disable_irq(ecc->irq_res_start);
> + disable_irq(ecc->irq_res_end);
> + }
> +
> + pm_runtime_put_sync(dev);
> +
> + return 0;
> +}
> +
> +static int edma_pm_resume(struct device *dev)
> +{
> + int i, j, r;
> +
> + r = pm_runtime_get_sync(dev);
> + if (IS_ERR_VALUE(r)) {
Same here as above.
> + dev_err(dev, "%s: get_sync returned %d\n", __func__, r);
> + return r;
> + }
> +
> + for (j = 0; j < arch_num_cc; j++) {
> + struct edma *cc = edma_cc[j];
> +
> + s8 (*queue_priority_mapping)[2];
> + s8 (*queue_tc_mapping)[2];
> +
> + queue_tc_mapping = cc->info->queue_tc_mapping;
> + queue_priority_mapping = cc->info->queue_priority_mapping;
> +
> + /* Event queue to TC mapping */
> + for (i = 0; queue_tc_mapping[i][0] != -1; i++)
> + map_queue_tc(j, queue_tc_mapping[i][0],
> + queue_tc_mapping[i][1]);
> +
> + /* Event queue priority mapping */
> + for (i = 0; queue_priority_mapping[i][0] != -1; i++)
> + assign_priority_to_queue(j,
> + queue_priority_mapping[i][0],
> + queue_priority_mapping[i][1]);
> +
> + /* Map the channel to param entry if channel mapping logic
> + * exist
> + */
Please follow the multi-line commenting style.
> + if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
> + map_dmach_param(j);
> +
> + for (i = 0; i < cc->num_channels; i++) {
> + if (test_bit(i, cc->edma_inuse)) {
> + /* ensure access through shadow region 0 */
> + edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
> + BIT(i & 0x1f));
There are some checkpatch checks that result from lines like this.
Please fix these as well.
CHECK: Alignment should match open parenthesis
#179: FILE: arch/arm/common/edma.c:1841:
+ map_queue_tc(j, queue_tc_mapping[i][0],
+ queue_tc_mapping[i][1]);
CHECK: Alignment should match open parenthesis
#184: FILE: arch/arm/common/edma.c:1846:
+ assign_priority_to_queue(j,
+ queue_priority_mapping[i][0],
CHECK: Alignment should match open parenthesis
#197: FILE: arch/arm/common/edma.c:1859:
+ edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
+ BIT(i & 0x1f));
total: 0 errors, 0 warnings, 3 checks, 132 lines checked
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
