These add apis that can be used to switch to memory mapped operatons
by configuring control module and qspi registers.
Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
---
drivers/spi/spi-ti-qspi.c | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 39aefd7..40f1c35 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -113,6 +113,10 @@ struct ti_qspi {
#define QSPI_CSPOL(n) (1 << (1 + n * 8))
#define QSPI_CKPOL(n) (1 << (n * 8))
+#define MM_SWITCH (1 << 0)
+#define MEM_CS (1 << 8)
+#define MEM_CS_DIS (0 << 8)
+
#define QSPI_FRAME 4096
#define QSPI_AUTOSUSPEND_TIMEOUT 2000
@@ -129,6 +133,30 @@ static inline void ti_qspi_write(struct ti_qspi *qspi,
writel(val, qspi->base + reg);
}
+void enable_qspi_memory_mapped(struct ti_qspi *qspi)
+{
+ u32 val;
+
+ ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
+ if (qspi->ctrl_mod) {
+ val = readl(qspi->ctrl_base);
+ val |= MEM_CS;
+ writel(val, qspi->ctrl_base);
+ }
+}
+
+void disable_qspi_memory_mapped(struct ti_qspi *qspi)
+{
+ u32 val;
+
+ ti_qspi_write(qspi, ~MM_SWITCH, QSPI_SPI_SWITCH_REG);
+ if (qspi->ctrl_mod) {
+ val = readl(qspi->ctrl_base);
+ val &= MEM_CS_DIS;
+ writel(val, qspi->ctrl_base);
+ }
+}
+
static int ti_qspi_setup(struct spi_device *spi)
{
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
