This is no longer needed when booted with device tree. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/mach-omap2/pm.c | 161 +---------------------------------------------- 1 file changed, 1 insertion(+), 160 deletions(-) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e1b4141..cc3b00d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -30,7 +30,6 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" -#include "twl-common.h" /* * omap_pm_suspend: points to a function that does the SoC-specific @@ -70,42 +69,6 @@ void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) } #endif -static int __init _init_omap_device(char *name) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup(name); - if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", - __func__, name)) - return -ENODEV; - - pdev = omap_device_build(oh->name, 0, oh, NULL, 0); - if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", - __func__, name)) - return -ENODEV; - - return 0; -} - -/* - * Build omap_devices for processors and bus. - */ -static void __init omap2_init_processor_devices(void) -{ - _init_omap_device("mpu"); - if (omap3_has_iva()) - _init_omap_device("iva"); - - if (cpu_is_omap44xx()) { - _init_omap_device("l3_main_1"); - _init_omap_device("dsp"); - _init_omap_device("iva"); - } else { - _init_omap_device("l3_main"); - } -} - int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { /* XXX The usecount test is racy */ @@ -118,84 +81,6 @@ int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } -/* - * This API is to be called during init to set the various voltage - * domains to the voltage as per the opp table. Typically we boot up - * at the nominal voltage. So this function finds out the rate of - * the clock associated with the voltage domain, finds out the correct - * opp entry and sets the voltage domain to the voltage specified - * in the opp entry - */ -static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - const char *oh_name) -{ - struct voltagedomain *voltdm; - struct clk *clk; - struct dev_pm_opp *opp; - unsigned long freq, bootup_volt; - struct device *dev; - - if (!vdd_name || !clk_name || !oh_name) { - pr_err("%s: invalid parameters\n", __func__); - goto exit; - } - - if (!strncmp(oh_name, "mpu", 3)) - /* - * All current OMAPs share voltage rail and clock - * source, so CPU0 is used to represent the MPU-SS. - */ - dev = get_cpu_device(0); - else - dev = omap_device_get_by_hwmod_name(oh_name); - - if (IS_ERR(dev)) { - pr_err("%s: Unable to get dev pointer for hwmod %s\n", - __func__, oh_name); - goto exit; - } - - voltdm = voltdm_lookup(vdd_name); - if (!voltdm) { - pr_err("%s: unable to get vdd pointer for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - clk = clk_get(NULL, clk_name); - if (IS_ERR(clk)) { - pr_err("%s: unable to get clk %s\n", __func__, clk_name); - goto exit; - } - - freq = clk_get_rate(clk); - clk_put(clk); - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - pr_err("%s: unable to find boot up OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - bootup_volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - voltdm_scale(voltdm, bootup_volt); - return 0; - -exit: - pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); - return -EINVAL; -} - #ifdef CONFIG_SUSPEND static int omap_pm_enter(suspend_state_t suspend_state) { @@ -245,40 +130,16 @@ static const struct platform_suspend_ops omap_pm_ops = { #endif /* CONFIG_SUSPEND */ -static void __init omap3_init_voltages(void) -{ - if (!cpu_is_omap34xx()) - return; - - omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); - omap2_set_init_voltage("core", "l3_ick", "l3_main"); -} - -static void __init omap4_init_voltages(void) -{ - if (!cpu_is_omap44xx()) - return; - - omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); - omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); -} - static inline void omap_init_cpufreq(void) { struct platform_device_info devinfo = { }; - if (!of_have_populated_dt()) - devinfo.name = "omap-cpufreq"; - else - devinfo.name = "cpufreq-cpu0"; + devinfo.name = "cpufreq-cpu0"; platform_device_register_full(&devinfo); } static int __init omap2_common_pm_init(void) { - if (!of_have_populated_dt()) - omap2_init_processor_devices(); omap_pm_if_init(); return 0; @@ -287,26 +148,6 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { - /* - * In the case of DT, the PMIC and SR initialization will be done using - * a completely different mechanism. - * Disable this part if a DT blob is available. - */ - if (!of_have_populated_dt()) { - - /* Init the voltage layer */ - omap_pmic_late_init(); - omap_voltage_late_init(); - - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); - - /* Smartreflex device init */ - omap_devinit_smartreflex(); - - } - /* cpufreq dummy device instantiation */ omap_init_cpufreq(); -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html