[PATCH v3 10/10] arm/dts: added dt properties to adapt to the new phy framwork

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
and Documentation/devicetree/bindings/phy/ti-phy.txt.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 arch/arm/boot/dts/omap5.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 29a6354..c135677 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -678,6 +678,8 @@
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				phys = <&usb2_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				dr_mode = "peripheral";
 				tx-fifo-resize;
 			};
@@ -694,6 +696,7 @@
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
 				ctrl-module = <&omap_control_usb2phy>;
+				#phy-cells = <0>;
 			};
 
 			usb3_phy: usb3phy@4a084400 {
@@ -703,6 +706,7 @@
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				ctrl-module = <&omap_control_usb3phy>;
+				#phy-cells = <0>;
 			};
 		};
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux