[PATCH 0/5] N900 DT support for N900 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This patchset adds DT support for the N900 panel. The panel bindings will be
extended once omapdss has DT support. Until then the panel driver defaults to
omapdss.sdi0 in DT mode.

-- Sebastian

Sebastian Reichel (5):
  OMAPDSS: ACX565AKM: Add basic DT support
  DTS: ARM: OMAP3-N900: Add vendor prefixes to SPI devices
  DTS: ARM: OMAP3-N900: Add reset gpio to lcd node
  OMAPDSS: SDI: Use V28 as regulator for N900
  Documentation: dt: Document ACX565AKM DT binding

 .../devicetree/bindings/video/sony,acx565akm.txt   | 22 ++++++++++++++++
 arch/arm/boot/dts/omap3-n900.dts                   |  7 ++++--
 .../omap2/displays-new/panel-sony-acx565akm.c      | 29 ++++++++++++++++++++++
 drivers/video/omap2/dss/sdi.c                      |  8 +++++-
 4 files changed, 63 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/sony,acx565akm.txt

-- 
1.8.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux